SIDOOR ATD420W machine tool door drive

The SIDOOR ATD420W machine tool door drive can be used to operate horizontal sliding doors. The drive system has been specially designed for use in a very wide range of machine tools. The communication-capable ATD420W controller offers complete flexibility for integration with a machine tool.

• For dynamic door weights up to 600 kg
• 4 digital inputs for signal detection (door open, door closed LB/DCPS sensor)
• Integrated PROFIBUS interface
• 2 relay contacts for additional position signals
• Direct connection to a light barrier as type 2 ESPE (electro-sensitive protective equipment) according to EN 61496-1
• Automatic determination of the door weight and friction during the learn run
• Parameter assignment and analysis of the door parameters via PROFIdrive
• Operating temperature -20 to +50 °C
• Flexible motor management, i.e. automatic recognition of the geared motor
• Assisted drive (motor-assisted movement of the door)
• Impulse stop (door stopped automatically by applying light force)
• Impulse drive (automatic door movement after applying light force)
• Opening width 0.3 to 4 m
• Door speeds up to 0.5 m/s
• Emergency power input via special emergency power module (24 V DC ±15 %)
• Auxiliary power output 24 V DC ±15 % and 0.4 A (short-circuit-proof)
• Output stage short-circuit-proof
• Vandal-proof
• Displays the current operating states on a 7-segment display directly on the controller or with the Software Kit or Service Tool
• All door parameters can be assigned via the PROFIdrive profile with the function block provided. For details see the System Manual “SIDOOR AT40, ATD400V, ATD400K, ATD400W, ATD410W, ATD400S, ATE250S”, ATD400T http://support.automation.siemens.com/WW/view/en/58531074