The SIMATIC IPC677D comprises a computer unit and an operator control unit.

Components of the computer unit:

• Rugged metal enclosure, resistant to vibration and shock, with high electromagnetic compatibility
• Processor:
  • Intel Celeron 2.2 GHz, 2 cores
  • Intel Core i3 2.4 GHz, 2 cores, hyper-threading
  • Intel Xeon 2.3 (3.3) GHz, 4 cores, hyper-threading, turbo-boost
• Main memory basic configuration: 2 GB
• 3.5" SATA hard disk: ? 250 Gbyte;
  the special vibration-absorbing hard disk support ensures reliable operation even under extreme mechanical stress
• Graphics integrated on CPU (Intel Graphics Media Accelerator)
• Interfaces:
  • 2 x 10/100/1 000 Ethernet
  • PROFIBUS DP/MPI on board, isolated, CP 5622-compatible
  • PROFINET (IRT-capable), 3-port, switching-enabled, CP 1616-compatible
  • 4 x USB 3.0 connection
  • 1 x serial V.24 (9-pin)
• Retentive memory:
  • 2 MB NVRAM, can be used with WinAC RTX 128 KB (AC and DC versions)
• Free slots for expansions:
  • 2 x PCI or PCIe (slots with card retainer)
• Power supply: 110/230 V AC (autorange), 50/60 Hz or 24 V DC
• DVI-I and DisplayPort interface for connection of a further monitor, e.g. Industrial Flat Panel

Optional additional components:

• Main memory expansion to 4, 8, or 16 GB, or 8 or 16 GB with ECC
• SATA hard disk ? 500 GB
• Dual hard disk module 2 x ? 250 GB SATA as single disk configuration or RAID1 preconfigured
• 240 GB SSD (solid-state drive)
• DVD±RW±R combo drive
• 1 x PCIe x16 / 1 x PCI or 1 x PCIe x16 / 1 x PCIe x4 instead of 2 x PCI slots (with card retainers)
• Windows 7 Ultimate 32- or 64-bit operating system

Components of the operator control unit:

The operator control units are available in the following versions:

22" Touch

• 22" resistive single-touch TFT color display, 1 920 x 1 080 pixels, with front USB port
• 19" capacitive multi-touch TFT color display, 1 366 x 768 pixels
• 22" capacitive multi-touch TFT color display, 1 920 x 1 080 pixels

All control units fulfill the requirements of IP65 degree of protection. The analog resistive operator control units feature a USB 3.0 port on the front for connecting external peripheral devices, such as a mouse or keyboard. The computer unit is connected via a connecting cable attached at the rear of the operator control unit.

Distributed configuration

A distributed configuration can be set up with the SIMATIC IPC627D and the SIMATIC Industrial Flat Panel monitors.

The monitor can be placed up to 30 m away while retaining front functionality (incl. rear USB interfaces). Flat-panel monitors are available in different versions as devices without operating functionality or with touch or touch/key operation.

Expansion components

SIMATIC IPC DiagMonitor

• PC diagnostics/alarm software for early detection and diagnosis of PC problems
• Comprehensive monitoring of temperature, fans, hard disks (SMART), watchdog, BIOS battery
• Operating hours counter for preventive maintenance
• Integrated log functions, comprehensive text messages, online help (English/German)
• Network-wide monitoring via SNMP and OPC interface possible
• Integrated Web server for monitoring over the network using a Web browser

SIMATIC IPC Image & Partition Creator

• Software tool for preventive data back-up of the contents of mass storage devices (CFast cards, hard disks)
• High-speed restoring of system and data partitions with bit accuracy; user software and special installations are also backed up

SIMATIC IPC Service USB FlashDrive

• Software tool for adaptation of mass storage partitioning
• Mobile memory medium for backing up/restoring mass memories
• Preinstalled SIMATIC IPC Image & Partition Creator
• Ultra-compact and rugged

SIMATIC IPC USB FlashDrive

• Mobile memory medium for SIMATIC PC/PG
• Fast data transfer (USB 3.0) and high memory capacity
• Ultra-compact and rugged

Note:

For further information, see "Expansion components".