Single Motor Modules in booksize format . Технические данные. Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на Single Motor Modules in booksize format

| | | | | |

Single Motor Module in booksize format 6SL312. -1TE...
DC link voltage (up to 2000 m (6562 ft) above sea level)	510 ... 720 V DC (line voltage 380 ... 480 V 3 AC)
Output frequency	0 … 650 Hz ¹⁾
Electronics power supply	24 V DC -15 %/+20 %
Type of cooling	Internal air cooling, external air cooling Power units with forced air cooling by built-in fans Cold plate cooling Liquid cooling
Permissible ambient and coolant temperature (air) during operation for line-side components, Line Modules and Motor Modules	0 … 40 °C (32 … 104 °F) without derating, > 40 … 55 °C (104 … 131 °F) see derating characteristics
Installation altitude	Up to 1000 m (3281 ft) above sea level without derating, > 1000 ... 4000 m (3281 ... 13124 ft) above sea level, see derating characteristics
Conformity	CE (Low Voltage and EMC Directives)
Approvals, according to	cULus
Safety Integrated	Safety Integrity Level 2 (SIL2) acc. to IEC 61508, Performance Level d (PLd) acc. to ISO 13849?1 and Control Category 3 acc. to ISO 13849?1 or EN 954?1 For further information see chapter Safety Integrated.

¹⁾ At rated output current (max. output frequency 1300 Hz for 62.5 ?s current control cycle, 8 kHz pulse frequency, 60 % permissible output current). Note the correlation between max. output frequency, pulse frequency and current derating.

DC link voltage 510 … 720 V DC		Single Motor Module in booksize format
Internal air cooling	6SL3120-...	1TE13-0AA4	1TE15-0AA4	1TE21-0AA4	1TE21-8AA4	1TE23-0AA3
External air cooling	6SL3121-...	1TE13-0AA4	1TE15-0AA4	1TE21-0AA4	1TE21-8AA4	1TE23-0AA3
Cold plate cooling	6SL3126-...	1TE13-0AA4	1TE15-0AA4	1TE21-0AA4	1TE21-8AA4	1TE23-0AA3
Liquid cooling	6SL3125-...	–	–	–	–	–
Output current
Rated current I_rated	A	3	5	9	18	30
Base-load current I_H	A	2.6	4.3	7.7	15.3	25.5
For S6 duty (40 %) I_S6	A	3.5	6	10	24	40
I _max	A	9	15	27	54	56
Type rating ²⁾
Based on I_rated	kW (HP)	1.6 (1.5)	2.7 (3)	4.8 (5)	9.7 (10)	16.0 (20)
Based on I_H	kW (HP)	1.4 (1)	2.3 (2.5)	4.1 (5)	8.2 (10)	13.7 (18)
Rated pulse frequency	kHz	4	4	4	4	4
DC link current I_d²⁾	A	3.6	6	11	22	36
Current carrying capacity
DC link busbars	A	100 ³⁾	100 ³⁾	100 ³⁾	100 ³⁾	100 ³⁾
24 V DC busbars ⁴⁾	A	20	20	20	20	20
DC link capacitance	?F	110	110	110	220	710
Current requirement At 24 V DC, max.	A	0.85	0.85	0.85	0.85	0.9
Internal/external air cooling
Power loss ⁵⁾
Maximum losses with internal air cooling in control cabinet	kW	0.05	0.07	0.1	0.19 0.18 with cold plate cooling	0.31
Typical losses with internal air cooling in control cabinet ⁶⁾	kW	0.03/0.01	0.04/0.03	0.05/0.04	0.1/0.09	0.1/0.21
With external air cooling, int./ext. ⁵⁾	kW	0,035/0,015	0,04/0,03	0,055/0,045	0,1/0,09	0,1/0,21
Cooling air requirement	m³/s (ft³/s)	0.008 (0.3)	0.008 (0.3)	0.008 (0.3)	0.008 (0.3)	0.016 (0.6)
Sound pressure level L_pA (1 m)	dB	< 60	< 60	< 60	< 60	< 60
Cold plate cooling
Power loss, int./ext. ⁵⁾	kW	0.025/0.02	0.035/0.035	0.045/0.05	0.08/0.1	0.085/0.22
Thermal resistance R_th	K/W	0.175	0.175	0.175	0.175	0.075
Motor connection U2, V2, W2		Connector (X1) ⁷⁾, max. 30 A	Connector (X1) ⁷⁾, max. 30 A	Connector (X1) ⁷⁾, max. 30 A	Connector (X1) ⁷⁾, max. 30 A	Connector (X1) ⁷⁾, max. 30 A
Shield connection		Integrated in connector (X1)	Integrated in connector (X1)	Integrated in connector (X1)	Integrated in connector (X1)	Integrated in connector (X1)
PE connection		M5 screw	M5 screw	M5 screw	M5 screw	M5 screw
Motor brake connection		Integrated into the plug-in motor connector (X1), 24 V DC, 2 A	Integrated into the plug-in motor connector (X1), 24 V DC, 2 A	Integrated into the plug-in motor connector (X1), 24 V DC, 2 A	Integrated into the plug-in motor connector (X1), 24 V DC, 2 A	Integrated into the plug-in motor connector (X1), 24 V DC, 2 A
Motor cable length, max.
Shielded	m (ft)	50 (164)	50 (164)	50 (164)	70 (230)	100 (328)
Unschielded	m (ft)	75 (246)	75 (246)	75 (246)	100 (328)	150 (492)
Degree of protection		IP20	IP20	IP20	IP20	IP20
Dimensions
Width	mm (in)	50 (1.97)	50 (1.97)	50 (1.97)	50 (1.97)	100 (3.94)
Height	mm (in)	380 (15.0)	380 (15.0)	380 (15.0)	380 (15.0)	380 (15.0)
Depth
With internal air cooling	mm (in)	270 (10.6)	270 (10.6)	270 (10.6)	270 (10.6)	270 (10.6)
With external air cooling, on/behind mounting surface	mm (in)	226/66.5 (8.90/2.62)	226/66.5 (8.90/2.62)	226/66.5 (8.90/2.62)	226/66.5 (8.90/2.62)	226/66.5 (8.90/2.62)
With cold plate cooling	mm (in)	226 (8.90)	226 (8.90)	226 (8.90)	226 (8.90)	226 (8.90)
Weight, approx.
With internal air cooling	kg (lb)	5.0 (11)	5.0 (11)	5.0 (11)	5.0 (11)	6.9 (15)
With external air cooling	kg (lb)	5.7 (13)	5.7 (13)	5.7 (13)	5.7 (13)	8.5 (19)
With cold plate cooling	kg (lb)	4.2 (9)	4.2 (9)	4.5 (10)	4.5 (10)	6.1 (13)

¹⁾ Rated power of a standard asynchronous (induction) motor at 400 V 3 AC link voltage.

²⁾ Rated DC link current for dimensioning an external DC connection.

³⁾ With reinforced DC link busbar set, 150 A is possible (accessories).

⁴⁾ If, due to a number of Line and Motor Modules being mounted side-by-side, the current carrying capacity exceeds 20 A, an additional 24 V DC connection using a 24 V terminal adapter is required (max. cross section 6 mm², max. fuse protection 20 A).

⁵⁾Power loss of Motor Module at rated power including losses of 24 V DC electronics power supply.

⁶⁾At max. motor cable length 30 m (98.4 ft), pulse frequency 4 kHz and DC link voltage 540 … 600 V.

⁷⁾ Connector not included in scope of supply, see Accessories.

DC link voltage 510 … 720 V DC		Single Motor Module in booksize format
Internal air cooling	6SL3120-...	1TE24-5AA4	1TE26-0AA4	1TE28-5AA4	1TE31-3AA4	1TE32-0AA4
External air cooling	6SL3121-...	1TE24-5AA4	1TE26-0AA4	1TE28-5AA4	1TE31-3AA4	1TE32-0AA4
Cold plate cooling	6SL3126-...	1TE24-5AA4	1TE26-0AA4	1TE28-5AA4	1TE31-3AA4	1TE32-0AA4
Liquid cooling	6SL3125-...	–	–	–	–	1TE32-0AA4
Output current
Rated current I_rated	A	45	60	85	132 (105 ¹⁾)	200 (140 ¹⁾)
Base-load current I_H	A	38	52	68	105 (84)	141 (99)
For S6 duty (40 %) I_S6	A	60	80	110	150 (120)	230 (161)
I _max	A	85	113	141	210	282
Type rating ²⁾
Based on I_rated	kW (HP)	24 (30)	32 (40)	46 (60)	71 (100)	107 (150)
Based on I_H	kW (HP)	21 (25)	28 (40)	37 (50)	57 (75)	76 (100)
Rated pulse frequency	kHz	4	4	4	4	4
DC link current I_d³⁾	A	54	72	102	158	200
Current carrying capacity
DC link busbars	A	200	200	200	200	200
24 V DC busbars ⁴⁾	A	20	20	20	20	20
DC link capacitance	?F	1175	1410	1880	2820	3995
Current requirement At 24 V DC, max.	A	1.2	1.2	1.5	1.5	1.5
Internal/external air cooling
Power loss ⁵⁾
Maximum power loss with internal air cooling in control cabinet	kW	0.46	0.62	0.79	1.29	2.09
Typical losses with internal air cooling in control cabinet ⁶⁾	kW	0.38	0.55	0.77	1.26	2.03
With external air cooling, int./ext. ⁵⁾	kW	0.14/0.32	0.16/0.46	0.2/0.59	0.29/1.0	0.47/1.62
Cooling air requirement	m³/s (ft³/s)	0.031 (1.1)	0.031 (1.1)	0.044 (1.6)	0.144 (5.1)	0.144 (5.1)
Sound pressure level L_pA (1 m)	dB	< 65	< 65	< 60	< 73	< 73
Cold plate cooling
Power loss, int./ext. ⁴⁾	kW	0.11/0.34	0.13/0.48	0.15/0.62	0.24/1.05	0.39/1.7
Thermal resistance R_th	K/W	0.055	0.055	0.05	0.028	0.028
Liquid cooling ⁷⁾
Power loss, int./ext.	kW	–	–	–	–	0.39/1.7
Rated volumetric flow for water at 70 kPa pressure drop ⁸⁾	l/min	–	–	–	–	8
Volume of liquid, internal	ml	–	–	–	–	100
Coolant temperature,max.
Without derating	°C (°F)					45 (113)
With derating	°C (°F)					50 (122)
Sound pressure level L_pA (1 m)	dB	–	–	–	–	<73
Motor connection U2, V2, W2		M6 screw studs (X1)	M6 screw studs (X1)	M8 screw studs (X1)	M8 screw studs (X1)	M8 screw studs (X1)
Conductor cross-section, max.	mm²	2.5 … 50	2.5 … 50	2.5 … 95, 2 ? 35	2.5 … 120, 2 ? 50	2.5 … 120, 2 ? 50
Shield connection		See Accessories	See Accessories	See Accessories	See Accessories	See Accessories
PE connection		M6 screw	M6 screw	M6 screw	M8 screw	M8 screw
Motor brake connection		Plug-in connector (X11), 24 V DC, 2 A	Plug-in connector (X11), 24 V DC, 2 A	Plug-in connector (X11), 24 V DC, 2 A	Plug-in connector (X11), 24 V DC, 2 A	Plug-in connector (X11), 24 V DC, 2 A
Motor cable length, max.
Shielded	m (ft)	100 (328)	100 (328)	100 (328)	100 (328)	100 (328)
Unschielded	m (ft)	150 (492)	150 (492)	150 (492)	150 (492)	150 (492)
Degree of protection		IP20	IP20	IP20	IP20	IP20
Dimensions
Width	mm (in)	150 (5.90)	150 (5.90)	200 (7.87)	300 (11.8)	300 (11.8)
Height	mm (in)	380 (15.0)	380 (15.0)	380 (15.0)	380 (15.0)	380 (15.0)
With fan ²⁾	mm (in)	–	–	–	629 (24.8)	629 (24.8)
With screwed fitting	mm (in)					553 (21.8) ¹⁾
Depth
With internal air cooling	mm (in)	270 (10.6)	270 (10.6)	270 (10.6)	270 (10.6)	270 (10.6)
With external air cooling, on/behind mounting surface	mm (in)	226/71 (8.90/2.79)	226/71 (8.90/2.79)	226/92 (8.90/3.62)	226/82 (8.90/3.23)	226/82 (8.90/3.23)
With cold plate cooling	mm (in)	226 (8.90)	226 (8.90)	226 (8.90)	226 (8.90)	226 (8.90)
With liquid cooling	mm (in)	–	–	–	–	226 (8.90)
Weight, approx.
With internal air cooling	kg (lb)	9 (20)	9 (20)	15 (33)	21 (46)	21 (46)
With external air cooling	kg (lb)	13.2 (29)	13.4 (29.5)	17.2 (38)	27.2 (60)	30 (66)
With cold plate cooling	kg (lb)	9.1 (20)	9.1 (20)	12.5 (28)	18 (40)	18 (40)
With liquid cooling	kg (lb)	–	–	–	–	21 (46)

¹⁾ In the case of cold-plate cooling, derating is necessary due to heat transfer to the external heat sink. For further information, see chapter System description ? Dimensioning.

²⁾ Rated power of a standard asynchronous (induction) motor at 400 V 3 AC link voltage.

³⁾ Rated DC link current for dimensioning an external DC connection.

⁵⁾ Power loss of Motor Module at rated power including losses of 24 V DC electronics power supply.

⁶⁾At max. motor cable length 30 m (98.4 ft), pulse frequency 4 kHz and DC link voltage 540 … 600 V.

⁷⁾The coolant connections are located on the lower side of the components. All connection elements can be accessed using an appropriate tool. Thread type of water connections: Pipe thread ISO 228 G ? B.

⁸⁾This value applies to water as coolant; for other coolants, refer to the 01/2012 Manual.

⁹⁾The fan is supplied with the Motor Module and must be installed before the Motor Module is commissioned.

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания