Measuring ranges
|
4, switchable internally and externally; autoranging is also possible
|
Smallest possible measuring span (referred to 1000 hPa absolute sample gas pressure, 0.5 l/min sample gas flow and 25 °C ambient temperature)
|
0.5% v/v 2% v/v or 5% v/v O2
|
Largest possible measuring span
|
100% v/v O2 (for a pressure over 2000 hPa: 25 % v/v O2)
|
Measuring ranges with suppressed zero
|
Any zero point is possible between 0 and 100% v/v as long as a suitable reference gas is used (see Table 1 in „Function“)
|
Position of use
|
Front panel vertical
|
Conformity
|
CE identification EN 50081-1, EN 50082-2
|
Design, enclosure
|
|
Degree of protection
|
IP20 according to EN 60529
|
Weight
|
Approx. 13 kg
|
Electrical characteristics
|
|
Power supply
|
100 to 120 V AC (rated range 90 V to 132 V), 48 to 63 Hz or
200 to 240 V AC (rated range 180 V to 264 V), 48 to 63 Hz
|
Power consumption
|
Approx. 35 VA
|
EMC interference immunity (ElectroMagnetic Compatibility)
|
According to standard requirements of NAMUR NE21 (08/98), EN 61326, EN 50270 (with gas warning unit)
|
Electrical safety
|
According to EN 61010-1, overvoltage category III
|
Fuses
|
100 ... 120 V: 1.0T/250
200 ... 240 V: 0.63T/250
|
Gas inlet conditions
|
|
Permissible sample gas pressure
|
|
- For analyzers with piping
|
500 … 3000 hPa absolute
|
|
|
|
500 … 1500 hPa absolute
|
|
500 … 1300 hPa absolute
|
Sample gas flow
|
18 … 60 l/h (0.3 … 1 l/min)
|
Sample gas temperature
|
0 … 50 ?C
|
Sample gas humidity
|
< 90 % RH (RH: relative humidity)
|
Time response
|
|
Warm-up period
|
With ambient temperature < 30 min (maximum accuracy achieved after 2 hours)
|
Response time (T90)
|
min. 1.5 to 3.5 s depending on version
|
Damping (electric time constant)
|
0 to 100 s, programmable
|
Dead time (purging time of gas path in analyzer at 1 l/min)
|
Approx. 0.5 to 2.5 s, depending on version
|
Time for internal signal processing
|
< 1 s
|
Pressure correction range
|
|
Pressure sensor
|
|
|
500 … 2000 hPa absolute
|
|
500 … 3000 hPa absolute
|
Measuring response (referred to 1000 hPa absolute sample gas pressure, 0.5 l/min sample gas flow and 25 °C ambient temperature)
|
Output signal fluctuation
|
< 0.75% of smallest possible measuring range specified on rating plate with an electronic time constant of 1 s (corresponds to ± 0.25% with 2?)
|
Zero drift
|
< 0.5%/month of smallest possible measuring span specified on rating plate
|
Measured-value drift
|
< 0.5%/month of respective measuring span
|
Repeatability
|
< 1%/month of respective measuring span
|
Minimum detectable quantity
|
1% of current measuring range
|
Linearity error
|
< 1%/month of respective measuring span
|
Influencing variables (referred to 1000 hPa absolute sample gas pressure, 0.5 l/min sample gas flow and 25 °C ambient temperature)
|
Ambient temperature
|
< 0.5%/10 K referred to the smallest possible measuring span according to rating plate, with measuring span 0.5%: 1%/10 K
|
Sample gas pressure (with air (100 hPa) as reference gas, a correction of the atmospheric pressure fluctuations is only possible when the sample gas is vented to ambient air)
|
Without pressure compensation: < 2% of measuring span/1% change in pressure
with pressure compensation: < 0.2% of measuring span/1% change in pressure
|
Residual gases
|
Deviation in zero point corresponding to paramagnetic or diamagnetic deviation of residual gas
|
Sample gas flow
|
< 1% of smallest possible measuring span according to rating plate with a change in flow of 0.1 l/min within the permissible flow range
|
Power supply
|
< 0.1% of output signal span with rated voltage ± 10%
|
Electric inputs and outputs
|
|
Analog output
|
0/2/4 to 20 mA, floating; max. load 750 ?
|
Relay outputs
|
6, with changeover contacts, freely selectable, e.g. for range identification; loading capacity: 24 V AC/DC/ 1 A, floating
|
Analog inputs
|
2, designed for 0/2/4 … 20 mA, for external pressure sensor and correction of influence of residual gas (correction of cross interference)
|
Binary inputs
|
6, designed for 24 V, floating, freely selectable, e.g. for range switching
|
Serial interface
|
RS 485
|
Options
|
Autocal function with 8 binary inputs and 8 relay outputs; also with PROFIBUS PA or PROFIBUS DP
|
Ambient conditions
|
|
Perm. ambient temperature
|
-30 to +70 °C during storage and transport, +5 to +45 ?C during operation
|
Permissible humidity
|
< 90% RH (RH: relative humidity) as annual average, during storage and transport (dew point must not be fallen below)
|