Rear enclosure part including accessories for mounting the firing pulse transformer module and/or fuse monitoring module for a parallel connection

Set of loose parts

6RY1805 0CM00

Screws, stud bolts, and snap-on parts to externally mount module parts

Set of loose parts

6RY1807 0CM00

Pre-fabricated connection set
ribbon cable:
To connect the two cradles when separately mounted

2 x 26-core ribbon cable
shielded (3 m long)

from X21A, X22A on PC board -A7109-
to X21A, X22A on PC board -A7043-

6RY1707 0CM01

1 x 10-core ribbon cable
shielded (3 m long)

from X23B on PC board -A7109-
to X23B on PC board -A7118-

1 x 20-core ribbon cable
shielded (3 m long)

from XF1 on PC board -A7109-
to XF1 on PC board -A7116-

1 x RJ45 patch cable
shielded (3 m long)

from X45 on PC board -A7109-
to X45 on PC board -A7117-

Pre-fabricated connection set
ribbon cable:
To connect the two cradles when separately mounted

2 x 26-core ribbon cable
shielded (10 m long)

from X21A, X22A on PC board -A7109-
to X21A, X22A on PC board -A7043-

6RY1807 0CM02

1 x 10-core ribbon cable
shielded (10 m long)

from X23B on PC board -A7109-
to X23B on PC board -A7118-

1 x 20-core ribbon cable
shielded (10 m long)

from XF1 on PC board -A7109-
to XF1 on PC board -A7116-

1 x RJ45 patch cable
shielded (10 m long)

from X45 on PC board -A7109-
to X45 on PC board -A7117-

Pre-fabricated connection set for
current transformer

2 x 2-core twisted cable
(2 m long)

from XB on PC board -A7109-
to the current transformers

6RY1707 0CM03 ¹⁾

Pre-fabricated connection set for
current transformer

2 x 2-core cable
shielded (10 m long)

from XB on PC board -A7109-
to the current transformers

6RY1707 0CM04 ¹⁾

Pre-fabricated connection set for
heatsink temperature sensing

1 x 2-core cable
shielded (10 m long)

from XT6 on PC board -A7109-
to temperature sensor on the heat sink

6RY1707 0CM05

Pre-fabricated connection set for
firing pulse cables

Connection set for 12 x 2-core twisted cable (3 m long)

from XIMP11, XIMP12, XIMP13, XIMP14, XIMP15, XIMP16, XIMP21, XIMP22, XIMP23, XIMP24, XIMP25,
XIMP26 to the thyristors

6RY1707 0CM06 ¹⁾

Pre-fabricated connection set for
fuse monitoring

6 x 2-core twisted cable (10 m long)

from XS1_5, XS2_5, XS3_5, XS4_5, XS5_5, XS6_5, XS7_5, XS8_5, XS9_5, XS10_5, XS11_5, XS12_5
or XS1_4, XS2_4, XS3_4, XS4_4, XS5_4, XS6_4, XS7_4, XS8_4, XS9_4, XS10_4, XS11_4, XS12_4
or XS1_3, XS2_3, XS3_3,
XS4_3, XS5_3, XS6_3, XS7_3, XS8_3, XS9_3, XS10

6RY1807 0CM07

Pre-fabricated connection set for
voltage sensing

1 x 3-core twisted cable
U-V-W (3 m long)
1 x 2-core twisted cable
C-D (3 m long)

from XU6, XV6, XW6 or XU5, XV5, XW5 or XU4, XV4, XW4 or XU3, XV3, XW3 or XU2, XV2, XW2 or
XU1, XV1, XW1 depending on the voltage
(5,6 V, 50 V, 125 V, 250 V, 575 V or 1000 V) to supply XC6, XD6 or XC5, XD5 or XC4, XD4 or XC3, XD3 or XC2, XD2

6RY1807 0CM08

Pre-fabricated connection set for
controlling the firing pulse transformers

12 x 2-core twisted cable
(1 m long)

from XIMP1, XIMP4 or XIMP2, XIMP5 or XIMP3, XIMP6 on PC board
-A7043- (side parts) on the
firing pulse transformer modules (single boards) with the terminals
X11, X12, X13, X14, X15, X16, X21, X22, X23, X24, X25, X26

6RY1707 0CM13 ¹⁾

Pre-fabricated connection set for
controlling the firing pulse transformers

2 x 12-core cable
shielded (10 m long)

from XIMP1, XIMP4 and/or XIMP2, XIMP5 and/or XIMP3, XIMP6 on PC board -A7043- to the external firing pulse transformers

6RY1707 0CM10 ¹⁾

Pre-fabricated connection set for
mounting cradles next to each other

2 x 26-core ribbon cable
shielded (10 m long)

from X21A, X22A on PC board -A7109-
to X21A, X22A on PC board -A7043-

6RY1807 0CM11

1 x 10-core ribbon cable
shielded (10 m long)

from X23B on PC board -A7109-
to X23B on PC board -A7118-

1 x 20-core ribbon cable
shielded (10 m long)

from XF1 on PC board -A7109-
to XF1 on PC board -A7116-

1 x RJ45 patch cable
shielded (10 m long)

from X45 on PC board -A7109-
to X45 on PC board -A7117-