Bestell-Nr.

6GK1 411-6CA40-0AA0

6GK1 411-6CA40-0BA0

Product type designation

IE/WSN-PA LINK

IE/WSN-PA LINK

Data transmission rate

• at interface 1

10 … 100 Mbit/s

10 … 100 Mbit/s

• at interface 2

10 … 100 Mbit/s

10 … 100 Mbit/s

• at interface 3

9.6 to 57.6 kbps

9.6 to 57.6 kbps

Interfaces

Number of electrical connections

• at interface 1 in accordance with Industrial Ethernet

1

1

• at interface 2 in accordance with Industrial Ethernet

1

1

• at interface 3 in accordance with RS 485

1

1

• For power supply

1

1

Design of electrical connection

• at interface 1 in accordance with Industrial Ethernet

RJ 45 port

RJ 45 port

• at interface 2 in accordance with Industrial Ethernet

RJ 45 port

RJ 45 port

• at interface 3 in accordance with RS 485

2-pin terminal strip

2-pin terminal strip

• For power supply

3-pin terminal strip

3-pin terminal strip

InterfacesWireless

Number of radio cards permanently installed

1

1

Number of internal antennas

1

0

Number of electrical connections for external antenna(s)

0

1

Design of electrical connection for external antenna(s)

-

N-Connector

Supply voltage, current consumption, power loss

Type of power supply

DC

DC

Supply voltage, external

24 V

24 V

• Minimum

20 V

20 V

• Maximum

28 V

28 V

Current consumed from external power supply at 24 V DC, maximum

0.5 A

0.5 A

Effective power loss, maximum

12 W

12 W

Permitted ambient conditions

Ambient temperature

• During operating phase

-40 … +60 °C

-40 … +60 °C

• During storage

-40 … +85 °C

-40 … +85 °C

• During transport

-40 … +85 °C

-40 … +85 °C

Relative humidity at 25 °C without condensation during operating phase, maximum

90 %

90 %

IP degree of protection

IP 65

IP 65

Design, dimensions and weights

Housing width

229 mm

229 mm

Housing height

• Without antenna

306 mm

306 mm

• With antenna

354 mm

354 mm

Housing depth

89 mm

89 mm

Net weight

4.54 kg

4.54 kg

Type of mounting

• Wall mounting

Yes

Yes

• Mast mounting

Yes

Yes

Type of mounting

Material for mast mounting included in scope of delivery

Material for mast mounting included in scope of delivery

Radio frequencies

Radio frequency with WirelessHART in the 2.4 GHz frequency band

• Start value

2.4 GHz

2.4 GHz

• Full-scale value

2.5 GHz

2.5 GHz

Performance dataWirelessHART

Number of WirelessHART devices which can be operated

100

100

Network latency

• Maximum with 100 field devices and WirelessHART network

10 s

10 s

• Maximum with 50 field devices and WirelessHART network

5 s

5 s

Transition link between two devices with WirelessHART network

• Maximum

100 m

100 m

• Note

The values may deviate if obstacles affecting radio transmission are present

The values may deviate if obstacles affecting radio transmission are present

HART protocol is supported

Yes

Yes

Product properties, functions, componentsGeneral

Protocol is supported

• Address Resolution Protocol (ARP)

Yes

Yes

• HTTP

Yes

Yes

• HTTPS

Yes

Yes

• Modbus TCP

Yes

Yes

• Modbus TCP secure

Yes

Yes

• Modbus RTU

Yes

Yes

Product functionsManagement, configuration, programming

Product function

• Web-based management

Yes

Yes

• DHCP client

Yes

Yes

Product functionsDiagnostics

Product function

• Web-based diagnostics

Yes

Yes

• WirelessHART diagnostics via Modbus

Yes

Yes

Product functionsSecurity

Product function

• Password protection - multilevel

Yes

Yes

• WirelessHART join key

Yes

Yes

• ACL - MAC-based

Yes

Yes

• WirelessHART network ID

Yes

Yes

SSL protocol is supported

Yes

Yes

Encryption principle

AES 128 bit

AES 128 bit

Product functionsTime

NTP protocol is supported

Yes

Yes

Standards, specifications, approvals

Standard for WirelessHART

HART V 7.1

HART V 7.1

Standard for wireless communication IEEE 802.15.4

Yes

Yes

Certificate of suitability

• CE mark

Yes

Yes

• Referred to CSA

CSA Division 2 & Dust Ignition-proof for Class I, Division 2, Groups A, B, C, and D. Dust Ignition-proof for Class II, Groups E, F, and G / Suitable for Class III Hazardous Locations. / Install per Siemens drawing A5E02467236A. Temperature Code: T4 (-40°C < Ta < 60°C) CSA Enclosure Type 4X

CSA Division 2 & Dust Ignition-proof for Class I, Division 2, Groups A, B, C, and D. Dust Ignition-proof for Class II, Groups E, F, and G / Suitable for Class III Hazardous Locations. / Install per Siemens drawing A5E02467236A. Temperature Code: T4 (-40°C < Ta < 60°C) CSA Enclosure Type 4X

• Referred to FM

FM Division 2, Non-Incendive for Class I, Division 2, Groups A, B, C, and D. Dust Ignition-proof for Class II, III, Division 1, Groups E, F, and G / Indoor and outdoor locations / NEMA Type 4X Temperature Code: T4 (-40°C < Ta < 60°C)

FM Division 2, Non-Incendive for Class I, Division 2, Groups A, B, C, and D. Dust Ignition-proof for Class II, III, Division 1, Groups E, F, and G / Indoor and outdoor locations / NEMA Type 4X Temperature Code: T4 (-40°C < Ta < 60°C)

• Referred to ATEX

ATEX type n, see note: Certificate number: Baseefa10ATEX0044X, ATEX marking: Ex II 3 G, Ex nA nL IIC T4 (-40 °C <= Ta <= 60 °C), rated voltage: 28 V, ATEX Dust Ignition-proof: Certificate number: Baseefa10ATEX0045X, ATEX marking: II 3 D, Ex tD A22 IP66 T135 (-40 °C <= Ta <= 60 °C), rated voltage: 28 V. Note on type n: Conditions for safe handling during installation: The device does not pass the 500 V insulation test in accordance with paragraph 6.8.1 of EN 60079-15:2005. This must be taken into account when installing the device.

ATEX type n, see note: Certificate number: Baseefa10ATEX0044X, ATEX marking: Ex II 3 G, Ex nA nL IIC T4 (-40 °C <= Ta <= 60 °C), rated voltage: 28 V, ATEX Dust Ignition-proof: Certificate number: Baseefa10ATEX0045X, ATEX marking: II 3 D, Ex tD A22 IP66 T135 (-40 °C <= Ta <= 60 °C), rated voltage: 28 V. Note on type n: Conditions for safe handling during installation: The device does not pass the 500 V insulation test in accordance with paragraph 6.8.1 of EN 60079-15:2005. This must be taken into account when installing the device.

• Referred to IECEx

IECEx type n, see note: Certificate number: IECEx BAS 10.0014X, Ex nA nL IIC T4 (-40 °C <= Ta <= 60 °C), rated voltage: 28 V, IECEx Dust Ignition-proof, see note: Certificate number: IECEx BAS 10.0015X, Ex tD A22 IP66 T135 (-40 °C <= Ta <= 60 °C), rated voltage: 28 V. Note on type n: Conditions for safe handling during installation: The device does not pass the 500 V insulation test in accordance with paragraph 6.8.1 of EN 60079-15:2005. This must be taken into account when installing the device.

IECEx type n, see note: Certificate number: IECEx BAS 10.0014X, Ex nA nL IIC T4 (-40 °C <= Ta <= 60 °C), rated voltage: 28 V, IECEx Dust Ignition-proof, see note: Certificate number: IECEx BAS 10.0015X, Ex tD A22 IP66 T135 (-40 °C <= Ta <= 60 °C), rated voltage: 28 V. Note on type n: Conditions for safe handling during installation: The device does not pass the 500 V insulation test in accordance with paragraph 6.8.1 of EN 60079-15:2005. This must be taken into account when installing the device.

• Referred to NEMA

-

-

Wireless approval

FCC and IC approval

IC approval