CU310 DP Control Unit features the following interfaces as standard:
- 1 DRIVE-CLiQ socket for communication with other DRIVE-CLiQ devices, e.g. Sensor or Terminal Modules
- 1 PM IF interface for communication with Power Modules in blocksize format
- 1 interface to the BOP20 Basic Operator Panel
- 1 PROFIBUS interface with PROFIdrive V4 profile
- 1 encoder evaluation
The following encoder signals can be evaluated:- Incremental encoder TTL/HTL
- SSI encoder without incremental signals
- 4 parameterizable digital inputs (floating)
- 4 parameterizable bidirectional digital inputs/digital outputs (non-floating)
- 1 serial RS232 interface
- 1 slot for the CompactFlash Card on which firmware and parameters are stored
- 3 test sockets and one reference ground for commissioning support
- 1 connection for the electronic power supply via the 24 V DC power supply connector
- 1 PE/ground conductor connection
- 1 safe standstill input (enable pulses) for controlling the connected PM340 Power Module
- 1 temperature sensor input (KTY84 130 or PTC)
The status of the CU310 DP Control Unit is indicated via multi-color LEDs.
A BOP20 Basic Operator Panel can also be snapped directly onto the CU310 DP Control Unit for diagnostic purposes.
As the firmware and parameter settings are stored on a plug-in CompactFlash Card, the Control Unit can be changed without the need for software tools.