The electronics is potted to protect it against moisture, corrosive atmospheres and vibration.
Notes on operating the pressure transmitter
Compensation of internal atmospheric pressure
Compensation of the internal atmospheric pressure of the SITRANS P Compact pressure transmitters is performed as follows:
- in the plug versions by means of the screwed gland (IP65)
- in the field housings by means of an integral sintered filter (IP 65) or a vented cable (IP67)
- in versions with cable outlet by means of a vented cable (IP67)
In the absolute pressure range there is no need for compensation with respect to atmospheric pressure.
Note: These degrees of protection are only achieved under the following conditions:
- if the pressure transmitter is installed correctly
- if the screwed glands are securely tightened
- if the cable diameters agree with the nominal diameters of the gaskets in the housing
Note: The integral EMC measures are only effective if the earth connection is made correctly.
CE marking
The CE marking of the pressure transmitter certifies compliance with the guidelines of the European Council (9/336/EC), the EMC law (13.11.1992), as well as the applicable generic standards.
Interference-free operation in systems and plants is achieved only if the specifications for shielding, earthing, cable routing and electrical isolation are observed during installation and assembly.
Hazardous areas
Note: Electrical equipment in hazardous areas must only be installed and operated by trained personnel.
Modifications to units and connections result in cancellation of the explosion protection and guarantee.
With intrinsically-safe circuits, make sure that equipotential bonding exists throughout the complete cabling inside and outside of the hazardous area. The limits specified in the ATEX approval must be observed.