BVP:090169

Цена на сайте указана розничная в ЕВРО без учета НДС.
Для уточнения цены и размера предоставляемой скидки - звоните или присылайте заявки

Molded plastic-enclosed outgoing units

Common features

• Molded-plastic enclosure
• Partially transparent cover for protective devices
• Power pick-up through silver-plated horseshoe contacts
• Reliable prevention of incorrect mounting
• Cable entry is from one side only (use plastic cable glands with strain relief, not included in scope of supply).
• The tap-off unit must first be removed from the trunking before it can be opened and the cable can be connected.
• The connecting cable should be supported separately if necessary.

Tap-off units with components fitted

• Two sizes (16 A and 32 A) for 3 cylindrical fuses (10 mm Г— 38 mm)
• One size with 3В MW space requirement (1В MW = 18В mm)

There are various versions with fuse bases, miniature circuit breakers, Schuko socket outlets and CEE socket outlets up to and including 32В A

BD01-AK01X/ZS

BD01-AK02X/ZS3

BD01-AK02M0/ CEE165A163

Tap-off units for free arrangement of components

• One size with 3В MW space requirement (1В MW = 18В mm), for operation from the outside through a hinge switch integrated in the cover.
• Installation of devices (e.g. miniature circuit breakers) according to DINВ 43871 up to and including 32 A possible

BD01-AK02M0/F

Tap-off units made of aluminium

Common features

• The enclosure is made from aluminum and molded plastic at both ends.
• A standard mounting rail is built-in for component mounting.
• Power pick-up through silver-plated horseshoe contacts
• The isolator built into the tap-off unit ensures that the tap-off unit is voltage-free when the cover is open.
• The tap-off unit can only be fitted to or removed from the tap-off point with its cover open (contacts retracted).
• Reliable prevention of incorrect mounting
• Cable entry is possible from three directions (use plastic cable glands with strain relief; not included in scope of supply).
• Can be combined with ancillary equipment units for additional functions.
• The connecting cables should be supported separately if necessary.

Tap-off units with components fitted

• Two sizes with 4В MW or 8В MW space requirement (1В MW = 18В mm)
• Various versions with fuse bases, miniature circuit breakers up to and including 63 A, Schuko and CEE socket outlets up to and including 32 A
• Versions with fitted miniature circuit breaker have a device installation unit.

BD01-AK1M1/A163

BD01-AK2M1/ CEE165A163

Tap-off units for free arrangement of components

• Two sizes with 4В MW and 8В MW space requirement (1В MW = 18В mm)
• Without or with device installation unit for external actuation (2 sizes with 4В MW and 8В MW)
• Installation of devices (e.g. miniature circuit breakers) according to DINВ 43871 up to and including 63 A possible

BD01-AK1M1/F

Country-specific tap-off units

These tap-off units contain equipment according to typical national requirements, such as special socket outlets.