6SL3555-0PA00-2AA0

Цена на сайте указана розничная в ЕВРО без учета НДС.
Для уточнения цены и размера предоставляемой скидки - звоните или присылайте заявки

Intelligent Operator Panel IOP‑2 Handheld

IOP‑2 Handheld for mobile use

The Intelligent Operator Panel IOP‑2 Handheld is a very user-friendly and powerful operator panel for commissioning and diagnostics as well as local operator control and monitoring of SINAMICS G110D, SINAMICS G120D, SINAMICS G110M and SIMATIC ET 200pro FC‑2 distributed inverters.

The IOP‑2 Handheld supports both newcomers and drive experts. Thanks to the membrane keyboard with a central sensor control field, the high-contrast color displays, the menu-based operation and the application wizards, it is easy to commission standard drives. A drive can be essentially commissioned without having to use a printed parameter list - as the parameters are displayed in plain text, and explanatory help texts and the parameter filtering function are provided.

Application wizards interactively guide you when commissioning important applications such as conveyor technology, pumps, fans and compressors. There is a basic commissioning wizard for general commissioning.

Up to two process values can be graphically visualized and up to four process values can be numerically visualized on the status screen/display. Process values can also be displayed in technological units.

The IOP‑2 Handheld supports standard commissioning of identical drives. For this purpose, a parameter list can be copied from an inverter into the IOP‑2 Handheld and downloaded into other drive units of the same type as required.

In addition to the IOP‑2, the IOP‑2 Handheld includes a housing with rechargeable batteries, a charging unit, an RS232 connecting cable, and a USB cable. The charging unit is supplied with connector adapters for Europe, the US and UK. When the batteries are fully charged, the operating time is up to 10 hours.

To connect the IOP‑2 Handheld to SINAMICS G110D, SINAMICS G120D, SINAMICS G110M and SIMATIC ET 200pro FC‑2, the RS232 connecting cable with optical interface is required in addition.

Updating the IOP‑2 Handheld

The IOP‑2 Handheld can be updated and expanded using the integrated USB interface.

Data to support future drive systems can be transferred from the PC to the IOP‑2 Handheld. Further, the USB interface allows user languages and wizards that will become available in the future to be subsequently downloaded and the firmware to be updated for the IOP‑2 Handheld ¹⁾.

¹⁾ Information on updates for the IOP‑2 Handheld is available at
https://support.industry.siemens.com/cs/document/67273266

Selection and ordering data

Technical specifications

Manual local control with keyswitch

Example: SINAMICSВ G110D and manual local control with integrated keyswitch

The manual local control is a simple method to locally control and commission the SINAMICSВ G110D distributed inverter.

To switch over from the automatic to the manual mode or to switch off the inverter, there is a keyswitch from which the key can be withdrawn in each of the three operating modes (Auto/Off/Local).

• The inverter is controlled via the PLC in "Auto" mode
• In the "Off" state, the device is shut down (however, the line supply voltage is still connected)
• The drive is locally and directly controlled in the "Local" setting. The device is simply controlled using directly assigned buttons. The following functions can be selected:
  • Switching over between continuous operation/jog mode
  • On/Counter-clockwise
  • On/Clockwise
  • Deactivate Quick Stop

The manual local control is mounted on the inverter instead of the standard blanking cover. This means that it can be retrofitted at a later date.

Selection and ordering data

Memory card

SINAMICS SD memory card

The parameter settings for an inverter can be stored on the SINAMICS SD memory card. When service is required, e.g. after the inverter has been replaced and the data have been downloaded from the memory card, the drive system is immediately ready for use again. The card holder is not included in the scope of supply of the inverter and must be separately ordered.

Selection and ordering data

Card holder for memory card

Use of the SINAMICSВ SD memory card requires a card holder. This can be subsequently inserted under the blanking cover or under the optional manual local control on the inverter - where it can also remain. In addition, a Secure Digital card (SD) of up to max. 1В GB can also be used.

SINAMICSВ G110D with integrated card holder (in the open state)

Selection and ordering data

RS232 interface cable for communication with a PC

For controlling and commissioning an inverter directly from a PC via a point-to-point connection if the appropriate software (STARTER commissioning tool ¹⁾, V4.1.3 and higher) has been installed.

Selection and ordering data

USB interface cable for communication with a PC

For controlling and commissioning an inverter directly from a PC via a point-to-point connection if the appropriate software (STARTER commissioning tool ¹⁾, V4.1.3 and higher) has been installed.

Selection and ordering data

Adapter for mounting SINAMICSВ G110D instead of SIRIUSВ M200D motor starter

For adaptation, there are connection boards that allow SINAMICSВ G110D to be mounted onto existing connection holes of the SIRIUSВ M200D motor starter (provided there is sufficient space). This means that a system can be adapted to future changes in requirements.

Selection and ordering data

STARTER commissioning tool

The STARTER commissioning tool (STARTER V4.1.3 and higher) supports the commissioning and maintenance of SINAMICSВ G110D inverters. The operator guidance combined with comprehensive, user-friendly functions for the relevant drive solution allow you to commission the device quickly and easily.

Selection and ordering data

¹⁾ The STARTER commissioning tool is also available on the Internet atВ http://www.siemens.com/starter

В 

An overview of all available accessories (e.g. connectors and cables) can be found under the following link:
http://www.siemens.com/distributeddrives-supplementaryproducts

Connector kit for braking resistor

A connector kit is available for connecting other braking resistors to SINAMICSВ G110D.

Selection and ordering data

UL connector kit

A special UL connector kit is required for using SINAMICSВ G110D in UL-compatible applications. This comprises all parts that are needed to connect power and the motor (contacts, contact housing, metal connector housing and a cable of about 7В m (23В ft) in length).

Selection and ordering data

Protection bar

Protection bars are available for the various frame sizes for protecting the connectors from shearing off in response to mechanical forces. These are mounted above and to the side of the SINAMICSВ G110D and protect the connectors and the keyswitch of the optional manual local control.

Selection and ordering data

Connecting cable and socket for AS-Interface

Selection and ordering data

Connecting cables and connectors for digital inputs

Selection and ordering data

Connecting cables pre-assembled at one end and connector sets to connect to the line supply

Selection and ordering data

Motor cables pre-assembled at one end and connector sets to connect the inverter to the motor

Selection and ordering data

Power bus distribution 400В V in IP65 degree of protection

Selection and ordering data