|
| | | | |
6GK1901-1BB30-0AA0Цена на сайте указана розничная в ЕВРО без учета НДС.
Для уточнения цены и размера предоставляемой скидки - звоните или присылайте заявки | Заказной номер | Вес | PG | Описание продукта | Цена | | 6GK1901-1BB30-0AA0 | 0.03 | 5K1 | SIMATIC NET IE FC RJ45 PLUG 145 RJ45, РОЗЕТОЧНЫЙ РАЗЪЁМ ДЛЯ ПОДКЛЮЧЕНИЯ К INDUSTRIAL ETHERNET В ВЫСОКОПРОЧНОМ МЕТАЛЛИЧЕСКИМ КОРПУСЕ, МЕТОД ПОКЛЮЧЕНИЯ - БЫТРЫЙ МОНТАЖ (FC) , ОТВОД КАБЕЛЯ ПОД УГЛОМ 145 ГРАД., 1 ШТ. В УПАКОВКЕ | По запросу |
п»ї CBE20 Communication Board The CBE20 Communication Board can be used to connect to a PROFINET IO network via a CU320-2 Control Unit. The SINAMICSВ S120 drive system therefore assumes the function of a PROFINET IO device and can perform the following functions: - PROFINET IO device
- 100В Mbit/s full duplex
- Supports real-time classes of PROFINETВ IO:
- RT (Real-Time)
- IRT (Isochronous Real-Time), minimum send cycle 500В Ојs
- Connection to control systems as PROFINET IO devices in accordance with PROFIdrive, Specification V4
- Standard TCP/IP communication for engineering processes using the STARTER commissioning tool
- Integrated 4-port switch with four RJ45 sockets based on the PROFINET ASIC ERTEC400. The optimum topology (line, star, tree) can therefore be configured without additional external switches
- Supports the functions "media redundancy" and "shared device"
The CBE20 Communication Board is required if: - a SINAMICS S120 or SINAMICS S150 converter with a CU320‑2 DP Control Unit (PROFIBUS) should be connected to a PROFINET-IO network
- SINAMICS Link is to be used to directly exchange data between several CU320‑2 DP (PROFIBUS) or CU320‑2 PN (PROFINET) Control Units without using a higher-level control system
- EtherNet/IP connectivity is required.
|
|
