6FC8506-3RX20-0AA0

Цена на сайте указана розничная в ЕВРО без учета НДС.
Для уточнения цены и размера предоставляемой скидки - звоните или присылайте заявки

Repair Service Contract 2.0 for machine tools

For the Repair Service ContractВ 2.0 for machine tools, the following supplementary options are offered. You can get further information on this from your Siemens sales office/regional company.

Flexible RSC start

Commissioning at the end customer's site can be concluded up to 24В months after delivery of the components installed in the machine. If this takes place later, the service period of the RSC will, however, begin no later than 24В months after the earliest delivery date of an installed DF&PD Siemens component.

Early start of the service period

The services of the RSC can be used before commissioning at the end customer's site. Upon conclusion of first commissioning, an additional service period starts at the place of performance that deviates from the final destination. After the Customer has provided the final destination notification the service period begins on-site.

The customer is obligated to communicate the following information in writing to Siemens immediately following first commissioning:

• Machine number
• Machine type
• Machining technology
• Control system
• Drive system
• Number of measuring circuits
• Data for the OEM application
• Date of first commissioning
• Country and complete address of the machine manufacturer and, if applicable, of the dealer and the BOM of the components from Siemens DF&DP that are used, with article numbers and serial numbers

The customer then receives a preliminary RSC certificate, which contains the start of the additional service period and the current place of performance of the machine. After commissioning at the end customer's site is reported, the customer receives the RSC certificate with the final destination information and the end of the service period.

Extension of an RSC

An existing RSC can be extended several times by 6В or 12В months till a maximum RSC term of 60В months is reached. The contract extension must be ordered during the RSC service period. For this, the customer will receive a new RSC certificate.

Data handling

To simplify data handling, information relating to the final destination certificate for SINUMERIK Operate and later products can be stored on the CNC control. The PC tool identSNAPSHOT is needed in order to transfer the data to Siemens. The PC tool can be run directly without installing it on a computer and is available on the Internet at:

http://www.siemens.com/sinumerik/register

The PC tool can also be used to generate final destination certificates for older versions of SINUMERIK CNC and offers various methods for acquiring machine parts lists. The PC tool is also capable of generating machine logbooks in PDF format. The generated data can also be kept with the machine as data backup.

For further information about identSNAPSHOT and handling the parts list of components used, please contact your Siemens sales office or Regional Company.

Contract versions

The framework contract is for machine manufacturers who agree to order one RSC for all machines with Siemens equipment.

The individual contract is for machine manufacturers who order an RSC only for certain machines equipped by Siemens.

OEM service levels

To guarantee repair service for OEM applications, an assessment is necessary based on the OEM service guideline. The assessment grades the OEM application from OEM service levels 0В toВ 4. A surcharge will be levied for OEM service levelsВ 1 toВ 4.