Application

More information

3TX6506-3B

Цена на сайте указана розничная в ЕВРО без учета НДС.
Для уточнения цены и размера предоставляемой скидки - звоните или присылайте заявки

Ferrite output reactor for AC operating mechanisms

The special material characteristics of ferrite reactors allow them to be operated at higher converter output frequencies of up to 600 Hz. Using clock frequencies up to 16 kHz is possible. Output reactors compensate capacitive charge-reversal currents with long cables and with appropriately long motor cables, limit the dv/dt at the motor terminals.

This enables the use of longer motor supply cables.

Use of ferrite output reactors:

• Operating mechanisms with asynchronous motors and a rated motor frequency (field weakening frequency) of up to 200 Hz and a maximum frequency of 300 Hz
• Operating mechanisms with reluctance or permanently excited synchronous motors with a maximum frequency of 600 Hz.

The selection table provides an overview of the reactor spectrum.

If we have caught your interest, or you would like further advice, simply copy the inquiry page under "Specification sheets" and fill it out adding the parameters for your specific requirement profile, and send it the address printed on the form. We will get in touch with you as quickly as possible.

Note:

The inquiry page is of course located on our website:

http://www.siemens.de/sidac