PM240?2 Power Modules, frame sizes FSA to FSF (with Control Unit and Operator Panel)

The PM240?2 Power Modules in blocksize format feature the following connections and interfaces as standard:

• Line supply connection
• PM-IF interface for connection of the PM240?2 Power Module and CU310-2/SIMOTION D410-2 Control Unit or CUA31/CUA32 Control Unit Adapter. The PM240?2 Power Module also supplies power to the CU310?2/SIMOTION D410?2 Control Unit or CUA31/CUA32 Control Unit Adapter by means of an integrated power supply
• Terminals DCP/R1 and R2 for connection of an external braking resistor
• Motor connection using screw terminals or screw studs
• Control circuit for the Safe Brake Relay for controlling a holding brake
• 2 PE/protective conductor connections

Power Modules without integrated line filter can be connected to grounded TN/TT systems and non-grounded IT systems. Power Modules with integrated line filter are suitable only for connection to TN systems with grounded neutral.

The integrated Braking Module is rated with the capability to continuously utilize the external braking resistor. The temperature of the external braking resistor must be monitored to provide protection against thermal overloading.

Push-through variant

The push-through variant allows the cooling fins of the Power Module to be pushed through the rear panel of the control cabinet. Push-through versions should be used in applications where the amount of power loss generated inside the control cabinet itself must be minimized.

Shield plates and shield connection kits are available. These can be used in the wiring installation for the Control Units and Power Modules to ensure that it complies with EMC guidelines.

Additional options

Further selected accessories are available from Siemens Solution Partners.

Please select "Drive Options" as the technology in the "Solution Partner Finder":

http://www.siemens.com/automation/partnerfinder