Basic Line Modules . Технические данные. Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на Basic Line Modules

| | | | | |

Basic Line Modules

General technical specifications

Electrical specifications
Line power factor at rated power
Basic fundamental (cos ?₁)	>0.96
Total (?)	0.75 ... 0.93
Efficiency	>99 %
DC link voltage, approx. ¹⁾	1.35 ? line voltage
Main contactor control
Terminal block -X9/5-6	240 V AC, max. 8 A 30 V DC, max. 1 A

¹⁾ The DC link voltage is unregulated and load-dependent. For additional information, please refer to the SINAMICS Low Voltage Engineering Manual.

Line voltage 380 ... 480 V 3 AC		Basic Line Modules
		6SL3335-1TE37-4AA3	6SL3335-1TE41-2AA3	6SL3335-1TE41-7AA3
Rated power
At I_rated DC (50 Hz 400 V)	kW	360	600	830
At I_H (50 Hz 400 V)	kW	280	450	650
At I_rated DC (60 Hz 460 V)	hp	555	925	1280
At I_H (60 Hz 460 V)	hp	430	690	1000
DC link current
Rated current I_rated DC	A	740	1220	1730
Base-load current I_H DC¹⁾	A	578	936	1350
Maximum current I_max DC	A	1110	1830	2595
Input current
Rated current I_rated I	A	610	1000	1420
Maximum current I_max I	A	915	1500	2130
Current demand
24 V DC auxiliary power supply	A	0.7	0.7	0.7
DC link capacitance
Basic Line Module	?F	12000	20300	26100
Drive line-up, max.	?F	96000	162400	208800
Power loss, at 50 Hz 400 V²⁾
Dissipated to coolant	kW	2.7	4.36	5.82
Dissipated to ambient air	kW	0.25	0.41	0.57
Total	kW	2.95	4.77	6.39
Coolant volume flow ³⁾	l/min	9	9	12
Liquid volume of the integrated heat exchanger	dm³	0.45	0.45	0.79
Pressure drop, typ. ⁴⁾ for volume flow	Pa	70000	70000	70000
Heat exchanger material		Aluminum	Aluminum	Aluminum
Sound pressure level L_pA (1 m) at 50/60 Hz	dB	54	56	56
Line connection U1, V1, W1		2 ? M12 nut	2 ? M12 nut	2 ? M12 nut
Conductor cross section, max. (IEC)	mm²	4 ? 240	4 ? 240	4 ? 240
DC link connection DCP, DCN		2 ? M12 nut Busbar	2 ? M12 nut Busbar	2 ? M12 nut Busbar
PE/GND connection		2 ? M12 nut	2 ? M12 nut	2 ? M12 nut
Conductor cross section, max. (IEC)	mm²	4 ? 240	4 ? 240	4 ? 240
Cable length, max. ⁵⁾
Shielded	m (ft)	2600 (8531)	4000 (13124)	4800 (15749)
Unshielded	m (ft)	3900 (12796)	6000 (19686)	7200 (23623)
Dimensions
Width	mm (in)	160 (6.3)	160 (6.3)	160 (6.3)
Height	mm (in)	1137 (44.8)	1137 (44.8)	1562 (61.5)
Depth	mm (in)	545 (21.5)	545 (21.5)	545 (21.5)
Weight, approx.	kg (lb)	108 (238)	108 (238)	185 (408)
Frame size		FBL	FBL	GBL
Minimum short-circuit current ⁶⁾	A	8800	12400	20000

¹⁾ The base-load current I_{H DC} is the basis for a duty cycle of 150 % for 60 s or I_{max DC} for 5 s with a duty cycle duration of 300 s.

²⁾ The specified power loss represents the maximum value at 100% utilization. The value is lower under normal operating conditions. To ensure safe dissipation of the minor power loss released to the ambient air, it is important to follow the instructions pertaining to control cabinet installation in the SINAMICS Low Voltage Engineering Manual.

³⁾ The value applies to coolants comprising water and a mixture of water and anti-freeze agent.

⁴⁾ The value is valid for water as coolant. Additional information and notes on other coolants is provided in the SINAMICS Low Voltage Engineering Manual.

⁵⁾ Total of all motor cables and DC link. Longer cable lengths for specific configurations are available on request. For additional information, please refer to the SINAMICS Low Voltage Engineering Manual.

⁶⁾ Current required for reliably triggering protective devices.

Line voltage 500 ... 690 V 3 AC		Basic Line Modules
		6SL3335-1TG34-2AA3	6SL3335-1TG37-3AA3	6SL3335-1TG41-3AA3	6SL3335-1TG41-7AA3
Rated power
At I_rated DC (50 Hz 690 V)	kW	355	630	1100	1370
At I_H (50 Hz 690 V)	kW	275	475	840	1070
At I_rated DC (50 Hz 500 V)	kW	245	420	750	950
At I_H (50 Hz 500 V)	kW	200	345	610	775
At I_rated DC (60 Hz 575 V)	hp	395	705	1230	1530
At I_H (60 Hz 575 V)	hp	305	530	940	1195
DC link current
Rated current I_rated DC	A	420	730	1300	1650
Base-load current I_H DC¹⁾	A	328	570	1014	1287
Maximum current I_max DC	A	630	1095	1950	2475
Input current
Rated current I_rated I	A	340	600	1070	1350
Maximum current I_max I	A	510	900	1605	2025
Current demand
24 V DC auxiliary power supply	A	0.7	0.7	0.7	0.7
DC link capacitance
Basic Line Module	?F	4800	7700	15500	19300
Drive line-up, max.	?F	38400	61600	124000	154400
Power loss, at 50 Hz 690 V ²⁾
Dissipated to coolant	kW	1.55	2.71	4.66	5.7
Dissipated to ambient air	kW	0.21	0.38	0.43	0.55
Total	kW	1.76	3.09	5.09	6.25
Coolant volume flow ³⁾	l/min	9	9	12	12
Liquid volume of the integrated heat exchanger	dm³	0.45	0.45	0.79	0.79
Pressure drop, typ. ⁴⁾ for volume flow	Pa	70000	70000	70000	70000
Heat exchanger material		Aluminum	Aluminum	Aluminum	Aluminum
Sound pressure level L_pA (1 m) at 50/60 Hz	dB	54	54	56	56
Line connection U1, V1, W1		2 ? M12 nut	2 ? M12 nut	2 ? M12 nut	2 ? M12 nut
Conductor cross section, max. (IEC)	mm²	4 ? 240	4 ? 240	4 ? 240	4 ? 240
DC link connection DCP, DCN		2 ? M12 nut Busbar	2 ? M12 nut Busbar	2 ? M12 nut Busbar	2 ? M12 nut Busbar
PE/GND connection		2 ? M12 nut	2 ? M12 nut	2 ? M12 nut	2 ? M12 nut
Conductor cross section, max. (IEC)		4 ? 240	4 ? 240	4 ? 240	4 ? 240
Cable length, max. ⁵⁾
Shielded	m (ft)	1500 (4921)	1500 (4921)	2250 (7382)	2250 (7382)
Unshielded	m (ft)	2250 (7382)	2250 (7382)	3375 (11073)	3375 (11073)
Dimensions
Width	mm (in)	160 (6.3)	160 (6.3)	160 (6.3)	160 (6.3)
Height	mm (in)	1137 (44.8)	1137 (44.8)	1562 (61.5)	1562 (61.5)
Depth	mm (in)	545 (21.5)	545 (21.5)	545 (21.5)	545 (21.5)
Weight, approx.	kg (lb)	108 (238)	108 (238)	185 (408)	185 (408)
Frame size		FBL	FBL	GBL	GBL
Minimum short-circuit current ⁶⁾	A	4400	7200	16800	18900

¹⁾ The base-load current I_{H DC} is the basis for a duty cycle of 150 % for 60 s or I_{max DC} for 5 s with a duty cycle duration of 300 s.

³⁾ The value applies to coolants comprising water and a mixture of water and anti-freeze agent.

⁴⁾ The value is valid for water as coolant. Additional information and notes on other coolants is provided in the SINAMICS Low Voltage Engineering Manual.

⁶⁾ Current required for reliably triggering protective devices.

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания