The CP 1542SP-1 IRC has all the advantages of the ET 200SP design:

• Compact, space-saving design:
  • Module powered via separate power supply
  • Three LEDs for displaying the operating state and communication state of the module as well as LEDs on the bus adapter.
  • Can be operated simultaneously with BA Send module and CM DP module.
• Simple installation:
  The CP 1542SP-1 IRC is mounted on the ET 200SP DIN rail and is connected to the adjacent modules via the backplane bus.
• The BusAdapter (not included in scope of delivery) makes various connection methods possible;
  • For standard environmental conditions, BA 2xRJ45 for connection via RJ45 connector
  • For mechanical loading during operation and/or increased EMC requirements
    BA 2xFC, BA 2xLC, BA LC/RJ45, BA LC/FC, BA 2xSCRJ, BA SCRJ/RJ45, BA SCRJ/FC
• The CP 1542SP-1 IRC can be operated without a fan; no backup battery is required.
• The module can be replaced without the need for a programming device
• The CP can be equipped with an equipment labeling plate.
• Optional labeling using light gray or yellow labeling strips. There is a choice of 2 materials:
  • Film and roll with 500 strips, for thermal transfer roll printer
  • Paper (280 g/m2), DIN A4 sheets with 100 strips each, for laser printer

Scope of delivery:
CP 1542SP-1 IRC, 24 V DC connector (BusAdapter must be ordered separately)