Product type designation

• ? Voltage measurement

• ? Voltage measurement with voltage transformers

• ? Current measurement

• ? Phase current measurement without current transformers

• ? Phase current measurement with current transformers

• ? Energy measurement

• ? Frequency measurement

• ? Power measurement

• ? Active power measurement

• ? Reactive power measurement

• ? I&M data

• ? Isochronous mode

• ? STEP 7 TIA Portal configurable/integrated as of version

• ? cyclic measurement

• ? acyclic measurement

• ? Acyclic measured value access

• ? Fixed measured value sets

• ? Freely definable measured value sets

Reparameterization possible in RUN

Calibration possible in RUN

Mounting position

Design of the power supply

Type of supply voltage

permissible range, lower limit (AC)

permissible range, upper limit (AC)

• ? permissible range, lower limit

• ? permissible range, upper limit

Power loss, typ.

• ? Address space per module, max.

Cycle time (all channels), typ.

• ? Diagnostic alarm

• ? Limit value alarm

• ? Hardware interrupt

• ? Monitoring of the supply voltage (PWR-LED)

• ? Channel status display

• ? for channel diagnostics

• ? for module diagnostics

• ? Measuring procedure for voltage measurement

• ? Measuring procedure for current measurement

• ? Type of measured value acquisition

• ? Curve shape of voltage

• ? Buffering of measured variables

• ? Parameter length

• ? Bandwidth of measured value acquisition

• — automatic detection of line frequency

• — Frequency measurement, min.

• — Frequency measurement, max.

• — Measurable line voltage between phase and neutral conductor

• — Measurable line voltage between the line conductors

• — Measurable line voltage between phase and neutral conductor, min.

• — Measurable line voltage between phase and neutral conductor, max.

• — Measurable line voltage between the line conductors, min.

• — Measurable line voltage between the line conductors, max.

• — Measurement category for voltage measurement in accordance with IEC 61010-2-030

• — Internal resistance line conductor and neutral conductor

• — Power consumption per phase

• — Impulse voltage resistance 1,2/50µs

• — measurable relative current (AC), min.

• — measurable relative current (AC), max.

• — Continuous current with AC, maximum permissible

• — Apparent power consumption per phase for measuring range 5 A

• — Rated value short-time withstand current restricted to 1 s

• — Input resistance measuring range 0 to 5 A

• — Zero point suppression

• — Surge strength

• — Measured variable voltage

• — Measured variable current

• — Measured variable apparent power

• — Measured variable active power

• — Measured variable reactive power

• — Measured variable power factor

• — Measured variable active energy

• — Measured variable reactive energy

• — Measured variable neutral current

• — Measured variable phase angle

• — Measured variable frequency

• ? between the channels and backplane bus

Isolation tested with

• ? horizontal installation, min.

• ? horizontal installation, max.

• ? vertical installation, min.

• ? vertical installation, max.

Width

Height

Depth

Weight (without packaging)

• ? Burden power current transformer x/1A, min.

• ? Burden power current transformer x/5A, min.