Platform screen door drive . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на Platform screen door drive

| | | | | | | |

Platform screen door drive

Article number	6FB1231-3BM10-7AT0	6FB1231-3BM12-7AT0	6FB1231-3BM11-7AT0
	SIDOOR ATE530S	SIDOOR ATE530S COATED	SIDOOR ATE531S
General information
Product brand name	SIDOOR
Product designation	Door controller
Product version	ATE530S	ATE530S with protective coating	ATE531 with protective coating and with temperature extension
Optional product expansion	Standard mounting rail holder 6FB1144-0AT00-3AS0
Manufacturer's article no. of the usable motor	6FB1203-0AT12-7DA0
Manufacturer's article no. of the usable power supply unit	6FB1112-0AT20-2TR0
Installation type/mounting
Installation and mounting instructions	No direct exposure to the sun
Supply voltage
Rated value (DC)	36 V; With MED280: At 24 V DC max. door speed of 500 mm/s, at 28.8 V DC max. door speed of 800 mm/s. With MEG251: At 24 V DC max. door speed of 500 mm/s, at 28.8 V DC max. door speed of 750 mm/s
Power
Active power input (standby mode)	7 W
Digital inputs
Control inputs isolated	Yes
Control inputs p-switching	Yes
Fuse protection at DC end (recommendation)	Use of a circuit breaker in the supply path according to 60898-1, 8A, C-characteristic type SIEMENS: 5SY4108-7 or 5SY4108-7KK11
Input voltage
? per DC input, min.	10 V; Observe polarity !
? per DC input, max.	28 V; Observe polarity !
Input current
? per DC input, min.	3 mA
? per DC input, max.	15 mA
Digital outputs
Overload-proof	Yes
Remark	Ensure correct polarity! CAUTION: Do not supply with external voltage!
Output current
? For output (24 V DC), max.	400 mA
Relay outputs
Switching capacity of contacts
— at 30 V DC, min.	0.01 A
— at 30 V DC, max.	0.5 A
Mechanical data
Opening width of door, min.	0.35 m
Opening width of door, max.	5 m
Weight of door, max.	280 kg
Operating cycle frequency of door, max.	180 1/h
Kinetic energy, max.	75 J
Interfaces
Interfaces/bus type	PROFINET according to Conformance Class A, B, C; integrated switch for linear and ring structure
Isolation
Overvoltage category	2
Degree and class of protection
IP degree of protection	IP20
Standards, approvals, certificates
CE mark	Yes		No
UL approval	No
TUV Inspectorate approval	Yes
Standard for EMC	EN 61000-6-2 / EN 61000-6-4 / EN 61326-3-1 / EN 50121-3-2 / EN50121-4 / EN50121-5
Standard for safety	EN 60950-1 / EN 60335-1 / EN 14752 / EN ISO 13849-1 Cat. 2 PL d / IEC 62061: SIL 2
Ambient conditions
Ambient temperature during operation
? min.	-25 °C
? max.	50 °C		70 °C
? Remark	Screw control device thermally conductive onto a metallic mounting surface or standard rail mounting, otherwise the maximum operating temperature is only 40 °C		To ensure compliance with MTBF value, ensure that the ambient temperature is less than 50 °C for 90 % of operating time and screw the control unit onto a metallic mounting surface in a manner that ensures thermal conductivity or use standard rail mounting. At operating temperatures above 50 °C, the maximum output current of the 24 V DC output is a maximum of 0.1 A and the maximum number of cycles is 60/h.
Ambient temperature during storage/transportation
? Storage, min.	-40 °C
? Storage, max.	85 °C
Air pressure acc. to IEC 60068-2-13
? Installation altitude above sea level, max.	2 000 m
Relative humidity
? No condensation, min.	10 %
? No condensation, max.	93 %
Mechanics/material
Service life
? Mean time between failures (MTBF)	13 y
Dimensions
Width	320 mm
Height	60 mm
Depth	80 mm