SIMATIC NET antenna connecting cables

• The flexible SIMATIC NET antenna connecting cables are required for connecting antennas with active devices.
• The cables offer low attenuation so that the quality of the radio signal is only minimally reduced.
• All antenna cables are flame-resistant, chemical-resistant and silicone-free.
• These cables are also suitable for railway applications and meet the increased requirements for environmental conditions and fire protection which are required for use in vehicles (including EN45545-2).

Lightning protection elements

• When remote antennas are used outdoors, there is a risk of lightning strikes
• A lightning protector can be used to prevent damage

Cabinet feedthroughs

Together with the antenna connecting cables, the cabinet feedthroughs enable simple connection of remote antennas to the active components located in the control cabinet/box.

Product versions

SIMATIC NET antenna connecting cables

• Pre-assembled cable lengths (0.3 m, 1 m, 2 m, 5 m and 10 m)
• Two different cable versions: Standard cables and cables suitable for railway applications
• Different connector types and combinations (N-Connect, SMA, QMA)

Lightning protection elements

• LP798-1N: Lightning protection element for N-Connect connections
  • With gas discharge arrester for the frequency range 0 to 6 GHz for N-Connect connections
  • Suitable for DC infeed via the antenna cable

Cabinet feedthroughs

• N-Connect female/N-Connect female without flange for panel thicknesses up to 4.5 mm
  • Can also be used to connect two antenna connecting cables