Device type?

• ??Top-hat rail mounted device?
• ?Plastic case 96 mm ? 96 mm ? 100 mm / 3.78 in. x 3.78 in. x 3.94 in. (W ? H ? D)?
• ??Degree of protection IP20

Supply voltage???

• ?DC 24 – 250 V???
• AC 110 – 230 V, 45 – 65 Hz

Input and output circuits????

• 4 inputs for alternating voltage measurements??
• ??3 inputs for alternating current measurements up to 10 A continuous
• ?2 individually parameterizable binary outputs?
• 6 binary inputs and 6 binary outputs with SICAM I / O Unit expandable

Signalization LEDs

• Automatically monitor the functions of its hardware, software and firmware components.

Communication????

• Ethernet: IEC 60870-5-104 or Modbus TCP communication protocol. IEC 60870-5-104 can be executed redundantly.

Measurands

The following measurands can be recorded or calculated from the measured quantities:????

• Unbalance of alternating voltage and alternating current?
• TRMS (True RMS) for alternating voltage and current??
• Active, reactive and apparent power
• ?Active, reactive and apparent energy???
• Power frequency??
• Phase angle??
• Angle between phase-to-ground voltage L1-L2 and L1-L3??
• Power factor and active power factor
• Voltage and current till 21st:
  • Mean value of the 3-phase voltages: Vavg
  • Mean value of the 3-phase currents: Iavg

Time synchronization

For a common time basis when communicating with peripheral devices and time stamping of the process data.

• External time synchronization via Ethernet NTP
• Internal time synchronization via RTC (if external time synchronization is not available).