SICAM T is an digital measurement transducer that allows the measuring of electrical quantities in electrical networks in a single unit. In industries, power plants and substations, transducers are especially used for measurand (e.g. current, voltage, power, phase angle, energy or frequency) assignment into further processing through analog outputs or communication interface for precise control, notification or visualization tasks.
Features
Design: Compact and robust for flexible application in industrial and utility environments
Connections in 1-phase systems, in 3-wire and 4-wire systems
Applications: Flexible for power utilities, industrial and commercial sector applications
Measurements: up to 60 measured or calculated values available
Temperature range: -25 °C to +55 °C/-13 °F to 131 °F
Uncertainty: typically 0.1 % for voltage and current at rated input IEC 60688, and 0.2 s acc. to IEC 62053-21
High EMC immunity: according to standards EN 61000-6-2 and EN 61000-6-4 for the EMC directives, and with the standard EN 61010-1 for the low-voltage directive
UL Certfication: This product is UL-certified to standard UL 61010-1.
Highlights
Flexible current measurement range (up to 2 ? In))
4 fast analog outputs (reaction approx. 120 ms at 50 Hz and 100 ms at 60 Hz) for reliable control
2 individual binary outputs for fast switching, indications (e.g., limit violation) and operation status monitoring
4 LEDs for local status visualization
Ethernet communications via IEC 61850 and MODBUS TCP and serial interface via MODBUS RTU or IEC 60870-5-103
Internal battery for real time clock and saving of energy counter values in case of a power outage
User-friendly operation through Web server (no extra software for parameterization needed, no converters and extra cables)
Real time clock (RTC), field bus synchronization or network synchronization possible via NTP.
Product homepage - downloads in the internet (catalogs, firmware and device drivers, manuals)
