PM240M Power Modules . Технические данные. Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на PM240M Power Modules

| | | | | |

PM240M Power Modules

General technical specifications

	PM240M Power Modules
System operating voltage	380 V (-10 %) ... 480 V (+10 %) 3 AC
Grid requirements Short-circuit power ratio R_SC	>100
Input frequency	47 ... 63 Hz
Output frequency
Control mode V/f	0 ... 550 Hz
Control type Vector	0 ... 200 Hz
Pulse frequency	4 kHz (standard); 4 ... 16 Hz (in steps of 2 kHz) see derating data
Power factor	0.95
Inverter efficiency	95 ... 97 %
Output voltage, max. in % of the input voltage	87%
Overload capability
High overload (HO)	0.37 ... 3 kW (0.5 ... 4 hp): 2 ? rated output current for 3 s, followed by 1.5 ? rated output current for 57 s, over a cycle time of 300 s (110 % on average) 4 kW (5 hp): 1.6 ? rated output current for 3 s, followed by 1.5 ? rated output current for 57 s, over a cycle time of 300 s (110 % on average)
Electromagnetic compatibility	Integrated line filter class A according to EN 55011
Possible braking methods	Dynamic brake with internal braking resistors (accessories) Dynamic brake with external braking resistors R_min = 200 ? (for FSA), R_min = 60 ? (for FSB) DC brake Integrated brake control supplies DC power supply for the brake
	Line input voltage	380 V AC	400 V AC	440 V AC	480 V AC	500 V AC
	Resulting brake voltage	171 V DC	180 V DC	198 V DC	216 V DC	225 V DC
	Disconnection on the DC side permits "fast" braking (max. output current 1 A)
Degree of protection ¹⁾	IP66 (for Control Units, screw-type version) IP65 (for Control Units, plug-in version)
Operating temperature	-10 ... +55 °C (14 ... +131 °F)
Storage temperature	-40 ... +70 °C (-40 ... +158 °F)
Permissible mounting positions	All
Relative humidity	<95 % RH, condensation not permissible
Cooling	External cooling with motor fan
Installation altitude	Up to 1000 m (3281 ft) above sea level without derating Over 1000 m (3281 ft) see derating data
Short Circuit Current Rating (SCCR) ²⁾	40 kA
Protection functions	Undervoltage Phase failure detection Overvoltage Overload Ground fault Short-circuit Stall protection Motor blocking protection Motor overtemperature Inverter overtemperature Parameter locking
Compliance with standards	UL, cUL, CE, C-Tick (RCM)
CE marking, according to	EC Low Voltage Directive 73/23/EEC; filtered variants also: EC Low Voltage Directive 89/336/EEC

¹⁾ Applies to Power Modules and Control Units in the mounted state.

²⁾ Applies to industrial control panel installations to NEC article 409 or UL 508A.

Line voltage 380 … 480 V 3 AC		PM240M Power Modules
		6SL3517-1BE11-3AM0	6SL3517-1BE12-3AM0	6SL3517-1BE13-3AM0	6SL3517-1BE14-3AM0
Rated output current I_rated¹⁾	A	1.3	2.2	3.1	4.1
Maximum output current I_max	A	2.6	4.4	6.2	8.2
Rated power	kW (hp)	0.37 (0.5)	0.75 (1)	1.1 (1.5)	1.5 (2)
Rated pulse frequency	kHz	4	4	4	4
Efficiency ?	%	96.8	98.1	98.2	97.3
Power loss ²⁾ At rated output current	kW	0.025	0.032	0.041	0.052
Cooling air requirement	m³/s (ft³/s)	0.0048 (0.17)	0.0048 (0.17)	0.0048 (0.17)	0.0048 (0.17)
Sound pressure level L_pA (1 m)	dB	–	–	–	–
Rated input current ³⁾	A	1.3	2	2.8	3.6
Line supply connection U1/L1, V1/L2, W1/L3, PE
Conductor cross-section (recommended)	mm²	1 ... 2.5 18 ... 14 AWG	1 ... 2.5 18 ... 14 AWG	1 ... 2.5 18 ... 14 AWG	1 ... 2.5 18 ... 14 AWG
PE connection (external connection)
Conductor cross-section (recommended)	mm²	10	10	10	10
Motor connection U2, V2, W2, PE, motor brake, temperature sensor
Conductor cross-section	mm²	1 ... 2.5 18 ... 14 AWG	1 ... 2.5 18 ... 14 AWG	1 ... 2.5 18 ... 14 AWG	1 ... 2.5 18 ... 14 AWG
Motor cable length, max. Shielded	m (ft)	5 (16.41)	5 (16.41)	5 (16.41)	5 (16.41)
Degree of protection		IP66	IP66	IP66	IP66
Dimensions
Width	mm (in)	161 (6.34)	161 (6.34)	161 (6.34)	161 (6.34)
Height	mm (in)	135 (5.31)	135 (5.31)	135 (5.31)	135 (5.31)
Depth	mm (in)	270 (10.63)	270 (10.63)	270 (10.63)	270 (10.63)
Frame size		FSA	FSA	FSA	FSA
Weight, approx.	kg (lb)	2.1 (4.63)	2.1 (4.63)	2.1 (4.63)	2.1 (4.63)

¹⁾ The rated output current I_rated is based on the duty cycle for high overload (HO).

²⁾ Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311.

³⁾ The input current depends on the motor load and line impedance. The input currents apply for loading at rated power with a line impedance corresponding to u_K = 1 %.

Line voltage 380 … 480 V 3 AC		PM240M Power Modules
		6SL3517-1BE16-3AM0	6SL3517-1BE17-7AM0	6SL3517-1BE21-0AM0
Rated output current I_rated¹⁾	A	5.6	7.3	8.8
Maximum output current I_max	A	11.2	14.6	14.1
Rated power	kW (hp)	2.2 (3)	3 (4)	4 (5)
Rated pulse frequency	kHz	4	4	4
Efficiency ?	%	97.6	97.6	97.7
Power loss ²⁾ At rated output current	kW	0.078	0.103	0.126
Cooling air requirement	m³/s (ft³/s)	0.024 (0.85)	0.024 (0.85)	0.024 (0.85)
Sound pressure level L_pA (1 m)	dB	–	–	–
Rated input current ³⁾	A	5.3	6.9	8
Line supply connection U1/L1, V1/L2, W1/L3, PE
Conductor cross-section (recommended)	mm²	1 ... 2.5 18 ... 14 AWG	1 ... 2.5 18 ... 14 AWG	1 ... 2.5 18 ... 14 AWG
PE connection (external connection)
Conductor cross-section (recommended)	mm²	10	10	10
Motor connection U2, V2, W2, PE, motor brake, temperature sensor
Conductor cross-section	mm²	1 ... 2.5 18 ... 14 AWG	1 ... 2.5 18 ... 14 AWG	1 ... 2.5 18 ... 14 AWG
Motor cable length, max. Shielded	m (ft)	5 (16.41)	5 (16.41)	5 (16.41)
Degree of protection		IP66	IP66	IP66
Dimensions
Width	mm (in)	181 (7.13)	181 (7.13)	181 (7.13)
Height	mm (in)	135 (5.31)	135 (5.31)	135 (5.31)
Depth	mm (in)	309 (12.17)	309 (12.17)	309 (12.17)
Frame size		FSB	FSB	FSB
Weight, approx.	kg (lb)	3.4 (7.50)	3.4 (7.50)	3.4 (7.50)

¹⁾ The rated output current I_rated is based on the duty cycle for high overload (HO).

²⁾ Typical values. You can find additional information on the Internet at https://support.industry.siemens.com/cs/document/94059311.

³⁾ The input current depends on the motor load and line impedance. The input currents apply for loading at rated power with a line impedance corresponding to u_K = 1 %.