19" rack unit with 3 height units (HU) for installation
In hinged frame
In cabinets with or without telescope rails
Gas connections for sample gas inlet and outlet: for pipe diameter 6 mm
Purging gas connections (optional), purging gas connection for 6 mm or 1/4" hose (optional)
Wall-mounted device
Gas connections for sample gas inlet and outlet: Pipe union for pipe diameter 6 mm (directly on the modules)
Purging gas connections: Pipe diameter 12 mm
Field device
Field control unit: Flameproof encapsulated enclosure with mounted Ex e connection enclosure (IP55)
Ex-d field module with installed module (IP65)
ATEX- / IECEx approval for Zone 1
Display and control panel
LCD panel for simultaneous display of:
Measured value
Status bar
Measuring ranges
Menu-driven operation for parameterization, test functions, adjustment
Operator support in plain text
Operating software in six languages (English, German, French, Italian, Spanish, Portuguese)
Display and operator panel of the SIPROCESS GA700 devices
Inputs and outputs
19" rack unit and wall-mounted unit
8 digital inputs, designed for 24 V, floating, freely configurable (e.g. for measurement range switchover, processing of external signals from sample preparation)
8 relay outputs, with changeover contacts, freely configurable (e.g. for faults, maintenance requests, limit alarms, external solenoid valves)
Ethernet connection contained in the base unit (connection on the rear side, Ethernet RJ 45, 100 MBit)
Service interface (front side); Ethernet RJ 45, 100 MBit.
Field control unit
1 analog output for each component 0/4 to 20 mA
5 relay outputs, with changeover contacts, freely configurable, e.g. for faults or measuring range identification
5 digital inputs, designed for 24 V, floating, freely configurable, e.g. for measurement range switchover
Interface modules
19" rack unit and wall-mounted unit
Interface module 1.1: 12 relay outputs and 8 digital inputs
Interface module 2.1: 1 analog output for each measuring component (0/4 to 20 mA or configurable according to NAMUR), plus 3 relay outputs for each module
Interface module 2.2: One analog output for each measured component (0/4 to 20 mA or configurable according to NAMUR), 4 analog inputs and 4 digital inputs
Field control unit
Interface module 2.2: 4 analog inputs 0/4 to 20 mA
