The CPU 317TF-2 DP has the same functionality as the high-performance CPU 317 as well as additional integrated functions for technology/motion control. Integrated, fast I/O for technical functions such as cam switching or home position detection round off the performance range the module. Thanks to the integration of Safety Integrated, the controller for safety-oriented applications complies with the high safety requirements according to the relevant standards EN 954-1 up to Cat. 4, IEC 62061 up to SIL 3, and EN ISO 13849-1 up to PL e.

For the fail-safe applications, the STEP 7 option package Distributed Safety provides ready-made TUV-certified library blocks, e.g. for emergency-stop, two-hand control, muting and door monitoring.

The CPU 317TF-2 DP is equipped with the following:

• Microprocessor;
  the processor achieves a processing time of approximately 100 ns per binary instruction and 2 µs per floating-point operation. The CPU 317TF-2 DP reaches very high processing speeds, particularly where word or double-word commands and 32 bit fixed-point commands are concerned.
• 1.5 MB main memory;
  The extensive main memory for runtime-relevant program sections offers sufficient space for user programs. SIMATIC Micro Memory Cards (8 MB max.) as load memory for the program also allow the project to be stored in the CPU (complete with symbols and comments) and can be used for data archiving and recipe management.
• Integrated inputs and outputs for technical functions;
  4 digital inputs and 8 digital outputs, can be used for technical functions such as home position detection (BERO) or rapid cam switching signals.
  The digital inputs can also be used (with some restrictions) in the STEP 7 user program.
• Flexible expansion;
  up to 8 modules (single-tier configuration)
• Combined MPI/DP interface;
  the first integrated MPI/DP interface can establish up to 32 connections simultaneously to the S7-300/400 or connections to PGs, PCs and OPs. One of these connections is always reserved for the PG and another one for the OP. A simple network with up to 32 CPUs can be configured with the MPI and "global data communication".
  This interface can be reconfigured from an MPI to a PROFIBUS DP interface. The DP interface can be used as a DP master or as a DP slave.
• PROFIBUS DP (DRIVE) interface:
  The PROFIBUS DP (DRIVE) interface supports isochronous mode and therefore provides an essential requirement to control high-speed and time-critical operations, such as are found in distributed axes in synchronized applications. The interface can only be used as a DP master. It serves to connect drive components. DP-V0 slaves can also be operated on the DP(DRIVE) spur on a limited basis in addition to drive systems. The connectable drives are specified in the technical specifications.

A list of the drives that can be operated on the DP-Drive can be found at:

http://support.automation.siemens.com