SIMATIC HMI Key Panel – Blank front design

• Simple seamless installation with mounting clips
• Rugged design, suitable for harsh industrial environments
• Prepared for installation of 22.5 mm standard components
• Easy installation, or retrofitting during operation, of standard 22.5 mm operator controls
  

SIMATIC HMI Key Panel – Basic functions

• Smooth front, therefore easy to clean
• Large mechanical illuminated pushbutton units can be programmed as switches or buttons
• Loop-through 24 V DC power supply, no additional terminals required
• Two PROFINET interfaces, perfect for line operation
• Suitable for ring operation thanks to media redundancy protocol (MRP), normal running even when the PROFINET power supply cable is unplugged
• Inputs and outputs on the rear, each pin can be used as an input or an output
• The F variants are also equipped with SIL 2/3 inputs

SIMATIC HMI KP8 PN

• 8 large mechanical illuminated pushbuttons with extremely good tactile feedback, thus also suitable for harsh industrial environments
• 8 freely configurable digital I/Os
• For standard CPUs
  

SIMATIC HMI KP8F PN

• Additional digital fail-safe inputs for connecting single-channel or 1 x 2-channel sensors, such as emergency stop
• For fail-safe CPUs
  

SIMATIC HMI KP32F PN

• 32 large mechanical illuminated pushbuttons with extremely good tactile feedback, thus also suitable for harsh industrial environments
• 16 freely configurable digital I/Os
• Additional digital fail-safe inputs for connecting 4 x 1-channel or 2 x 2-channel sensors, such as emergency stop
• For fail-safe and standard CPUs
  

Demo case

SIMATIC HMI Key Panel – low-cost demo and experiment case.

The case consists of a KP8 PN with a 1211C CPU including demo program, set on a small plexiglas stand ready for use.

• Contents:
  
  • 1x case
  • 1x KP8 PN
  • 1x CPU1211C
  • 1x stand, permanently wired, including program
• Power supply possible with a standard laptop mains adapter (not included in scope of supply)
  Prices and delivery times are available on request

Can be ordered by fax:

Siemens AG, Mr. Michael Christ

Industry Sector, I IA CE SE MF RS FDS

Wuerzburger Str. 121, 90766 Fuerth, Germany

Phone: +49 911 750-4128 / Fax: +49 911 750-2411