Frame size 071 to 355 mm (area of standard motors)
Frame sizes 160 to 355 mm (area of standard motors)
Frame sizes 090 to 250 mm (area of standard motors)
Power range: (50 Hz types)
Up to 315 kW (thermally utilized according to temperature class B at TU = 40 °C)
Up to 500 kW(thermally utilized to temperature class B for a water intake temperature of20 °C)
Up to 55 kW for braking torques from 32 to 400 Nm
Number of poles:
2 - 12 pole; also higher numbers of poles for special versions pole changing -2 speeds e.g. 4/2, 8/4, 12/6 -3 speeds e.g. 8/4/2, 8/6/4 (Dahlander or separate windings) (square-law or constant torque applications)
2 - 6 pole
2 - 8 pole
Voltage range:
Up to 1000 V
Up to 690 V
Up to 690 V
Rated voltages:
All of the usual low-voltages and voltage ranges according to IEC 60038 However, also: Non-standard voltages and / or frequencies according to customer specifications
Operating mode:
S1 and various
Degree of protection:
IP55, IP56, to IP68
IP56, IP66 (higher degrees of protection on request
IP55, IP56, IP66 (higher degrees of protection on request)
Cooling type:
IC 411, IC 416, however, also special cooling types such as e.g. non-ventilated IC 410
IC 71 W
IC 411, IC 416
Type of construction:
IM B3, IM B5, IM B35, IM V1, IM V3, IM V5, IM V18, IM B14, IM B34 (special)
IM B3, IM B6, IM B7, IM B8, IM B9, IM B15, IM V5, IM V6, IM V8, IM V9IM B5, IM B35, IM V1, IM V3, IM B34, IM B14, IM V18, IM V19 (special)
Enclosure:
All 1PS0 motors in a gray cast iron design
Bearings:
Ball bearings (standard) and special bearings for high axial (thrust) and radial forces
Standards:
IEC, EN, DIN, VDE
Types of protection:
without
Noise level:
All motors are noise-optimized (noise limit values according to EN 60034-9), low-noise version possible for 2-pole motors (GG3)
All motors are noise-optimized (noise limit values according to EN 60034-9)
Features
Surface cooled (t.e.f.c.) - options:
Regreasing system from FS 160 - SPM nipple from FS 132 - stainless steel screws / bolts - larger connection system
Additional terminal box from FS 132 - anti-condensation heating from FS 132 - condensation water drain from FS 132
PTC thermistor as the only protection (TMS) up to and including FS 250
PTC thermistor as additional protection (TMS)
Can also be supplied for 60 Hz (adapted winding - increased power rating)
All motors with insulating material class H
All motors are available with an electrical design according to "NEMA Standards Publication No MG1"
Flange and shaft end can be designed and implemented in accordance with NEMA
Special versions e.g. for: Forced ventilation (for converter operation), mounted speed encoder, non-standard shaft end, backstop, special paint finishes, low temperatures down to -60 °C
