The SMC30 Sensor Module Cabinet-Mounted features the following interfaces as standard:

• 1 DRIVE-CLiQ interface
• 1 encoder connection via Sub-D connector or terminals
• 1 connection for the electronics power supply via the 24 V DC power supply connector
• 1 PE/protective conductor connection

The status of the SMC30 Sensor Module Cabinet-Mounted is indicated via a multi-color LED.

The SMC30 Sensor Module Cabinet-Mounted can be snapped onto a TH mounting rail in accordance with EN 60715 (IEC 60715).

The maximum encoder cable length between SMC30 modules and encoders is 100 m. For HTL encoders, this length can be increased to 300 m if the A+/A- and B+/B- signals are evaluated and the power supply cable has a minimum cross section of 0.5 mm².

The signal cable shield can be connected to the SMC30 Sensor Module Cabinet-Mounted via a shield connection terminal, e.g. Phoenix Contact type SK8 or Weidmuller type KLBU CO 1.