• Analog inputs for fail-safe SIPLUS S7 systems
• Applicable in the ET 200M distributed I/O device with IM 153-2 HF as well as centrally with SIPLUS S7-31xF-2 DP
• Properties of the SM 336; F-AI 6 x 0/4 ... 20 mA HART:
  • 6 analog inputs with galvanic isolation between channels and backplane bus
  • Input ranges: 0 mA to 20 mA, 4 mA to 20 mA
  • Short-circuit proof power supply of 2 or 4-wire transmitter via the module
  • External encoder supply possible
  • Applicable in safety mode
  • HART communication
  • Firmware update using HW Config
  • Identification data
  • Temperature range -25 ... +70 °C;
    (+70 °C when ensuring a forced convection with a minimal air velocity of 0.3 m/s through the module). If a violation of the permissible, specified parameters is detected during maintenance or by automatic diagnostics, the modules must be proof-tested by the manufacturer. Without this measure the temperature range is -25…60°C

Note:

SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme specific information was added.