The SCALANCE X-300 product line consists of compact Industrial Ethernet Switches for establishing electrical and/or optical line, ring and star topologies at 10/100/1000 Mbit/s
Three integral electrical and/or optical Gigabit Ethernet interfaces (10/100/1000 Mbit/s) and seven electrical Fast Ethernet interfaces (10/100 Mbit/s) for interconnecting multiple switches to establish Gigabit or Fast Ethernet rings or for connecting Industrial Ethernet nodes
High-speed media redundancy through integral redundancy manager both for Gigabit Ethernet (SCALANCE X-300, SCALANCE X-400) and Fast Ethernet (SCALANCE X-300 switches in the ring in combination with SCALANCE X-200 switches or OSM/ESM)
Switches from the SCALANCE X-300 product line support numerous IT standard and thus permit seamless integration of automation networks into existing corporate networks. Virtual local area networks (VLANs) can be constructed
The support of standardized redundancy procedures (Rapid Spanning Tree Protocol) permits redundant integration into higher-level enterprise networks
By learning the multicast sources and destinations (IGMP Snooping and IGMP Querier (Internet Group Management Protocol), SCALANCE X-300 switches can also filter multicast data traffic and thus limit the load on the network.
The ports can be configured for terminal devices that support authentication in accordance with IEEE 802.1x. Authentication is by means of a RADIUS server that must be configured appropriately and must be accessible via the network.
Rugged metal housing in S7-300 format for mounting on standard DIN rail, S7-300 mounting rail or for direct wall mounting in various positions
Compact, space-saving design for installation in the control cabinet
Rugged, industry-standard node connections with PROFINET-compatible RJ45 connectors that offer additional strain relief and flex relief thanks to latching on the housing
Redundant power feed for protection against power failure
Diagnostics on the device by means of LEDs (power, link status, data traffic, fault, redundancy manager)
Fault signaling contact can be easily set by means of the SELECT/SET button for simple display of faults
The devices feature PROFINET diagnostics, SNMP access, integral web server and automatic e-mail sending function for remote diagnostics and signaling over the network
Note:
SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme specific information has been added.
SIPLUS SCALANCE X308-2
Article No.
6AG1 308-2FL10-4AA3
Article No. based on
6GK5 308-2FL10-2AA3
Ambient temperature range
-10 ... +60 °C
Conformal coating
Coating of the printed circuit boards and the electronic components
Technical specifications
The technical data of the standard product applies except for the ambient conditions.
Ambient conditions
Relative humidity
100 %, dewing/frost permitted. No commissioning in bedewed state.
Biologically active substances, compliance with EN 60721-3-3
Class 3B2 mold, fungal and dry rot spores (excluding fauna). The supplied plug covers must remain in place over the unused interfaces during operation!
Chemically active substances, compliance with EN 60721-3-3,
Class 3C4 incl. salt spray in accordance with EN60068-2-52 (degree of severity 3). The supplied plug covers must remain in place over the unused interfaces during operation!
Mechanically active substances, compliance with EN 60721-3-3
Class 3S4 incl. sand, dust. The supplied plug covers must remain in place over the unused interfaces during operation!
Air pressure (depending on the highest positive temperature range specified)
1 080 ... 795 hPa (-1 000 ... +2 000 m) see ambient temperature range
