Marine duplex fiber-optic cable SIENOPYR

Halogen-free, non-crush, flame-retardant, marine-approved fiber-optic cable for permanent installation on ships and on offshore platforms indoors and on open deck. Sold by the meter.

Fiber-optic indoor cable

Halogen-free fiber-optic cable, non-crush, flame-retardant, for installation inside buildings (e.g. in production halls and in building automation). Supplied in fixed lengths, pre-assembled with 4 BFOC connectors.

Standard FOC/FRNC cable

Fiber-optic cables for the following application areas indoors and outdoors

• For routing above ground
• For installation inside buildings.

Sold by the meter and in fixed lengths, pre-assembled with 4 BFOC connectors.

Fiber-optic trailing cable

Fiber-optic cables for the special application of forced motion control, such as in continuously moving machine parts (in trailing cables) indoors and outdoors. Two cable variants are available for this application:

• FO Trailing Cable;
  Cable for high mechanical stress, PUR outer sheath, no UL approval
• FO Trailing Cable GP (general purpose);
  Cable for low mechanical stress, PVC outer sheath, with UL approval

Sold by the meter and in fixed lengths, pre-assembled with 4 BFOC connectors.

Fiber-optic outdoor cable

Waterproof cable (lengthwise and sideways) for use outdoors with non-metallic protection against rodents for laying into the ground.

Sold by the meter and in fixed lengths, pre-assembled with 4 BFOC connectors.

Note:
Special tools and specially trained personnel are required for pre-assembling glass fiber-optic cables

Application Examples

Use of pre-assembled fiber-optic cables with BFOC connectors (12 Mbit/s)