F electronic modules . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на F electronic modules

| | | |

F electronic modules

Article number		6ES7138-4FA05-0AB0
		ET200S, EL-MOD., 4/8 F-DI, DC 24V
Supply voltage
Rated value (DC)
? 24 V DC		Yes
Encoder supply
Number of outputs		2
Type of output voltage		min. L+ (-1.5 V)
Short-circuit protection		Yes; Electronic (response threshold 0.7 A to 1.8 A)
Output current
? Rated value		300 mA
? permissible range		0 to 300 mA
Power loss
Power loss, typ.		4 W
Address area
Occupied address area
? Inputs		6 byte
? Outputs		4 byte
Digital inputs
Number of digital inputs		8; 8 (one-channel); 4 (two-channel)
Input characteristic curve in accordance with IEC 61131, type 1		Yes
Number of simultaneously controllable inputs
? Number of simultaneously controllable inputs		8
Input voltage
? Type of input voltage		DC
? Rated value (DC)		24 V
Input current
? for signal "1", typ.		3.7 mA
Input delay (for rated value of input voltage)
for standard inputs
— parameterizable		Yes
— at "0" to "1", min.		0.3 ms
— at "0" to "1", max.		17 ms
— at "1" to "0", min.		0.3 ms
— at "1" to "0", max.		17 ms
Cable length
? shielded, max.		500 m
? unshielded, max.		500 m
Encoder
Connectable encoders
? 2-wire sensor		No
— permissible quiescent current (2-wire sensor), max.		0.6 mA; max.
Interrupts/diagnostics/status information
Diagnostic functions		Yes
Alarms
? Diagnostic alarm		Yes
Diagnostic messages
? Diagnostic information readable		Yes
? Short-circuit		Yes
Diagnostics indication LED
? Group error SF (red)		Yes
? Status indicator digital input (green)		Yes
Potential separation
Potential separation digital inputs
? between the channels		No
? between the channels and backplane bus		Yes
? Between the channels and load voltage L+		No
Standards, approvals, certificates
Highest safety class achievable in safety mode
? SIL acc. to IEC 61508		SIL 2 (single-channel), SIL 3 (two-channel)
Dimensions
Width		30 mm
Height		81 mm
Depth		52 mm
Weights
Weight, approx.		78 g

Article number		6ES7138-4FB04-0AB0
		ET200S, EL-MOD., 4 F-DO, DC 24V/2A
Supply voltage
Load voltage L+
? Rated value (DC)		24 V
? Reverse polarity protection		No
Input current
From load voltage L+ (no load), typ.		100 mA
from backplane bus 3.3 V DC, max.		28 mA
Power loss
Power loss, typ.		3.5 W
Digital outputs
Number of digital outputs		4
Short-circuit protection		Yes
Limitation of inductive shutdown voltage to		Typ. (2L+) -47 V
Controlling a digital input		No
Switching capacity of the outputs
? on lamp load, max.		10 W
Load resistance range
? lower limit		12 ?
? upper limit		1 k?
Output voltage
? for signal "1", min.		L+ (-2,0 V), current sourcing switch: L+ (-1,5 V), voltage drop on current sinking switch: max. 0.5 V
Output current
? for signal "1" rated value		2 A
? for signal "1" permissible range, min.		20 mA
? for signal "1" permissible range, max.		2.4 A
? for signal "0" residual current, max.		0.5 mA; Current-sourcing and current-sinking switches
Parallel switching of two outputs
? for uprating		No
? for redundant control of a load		No
Switching frequency
? with resistive load, max.		30 Hz; Symmetrical
? with inductive load, max.		0.1 Hz; Symmetrical
? on lamp load, max.		10 Hz; Symmetrical
Total current of the outputs
? Current per module, max.		6 A
Cable length
? shielded, max.		500 m
? unshielded, max.		500 m
Interrupts/diagnostics/status information
Diagnostic functions		Yes
Diagnostic messages
? Wire-break		Yes
? Short-circuit		Yes
Diagnostics indication LED
? Group error SF (red)		Yes
? Status indicator digital output (green)		Yes
Potential separation
Potential separation digital outputs
? between the channels		No
? between the channels and backplane bus		Yes
? Between the channels and load voltage L+		No
Isolation
tested with
? Load voltage L+ against backplane bus		2 545 V DC
Standards, approvals, certificates
Highest safety class achievable in safety mode
? SIL acc. to IEC 61508		SIL 3
Dimensions
Width		30 mm
Height		81 mm
Depth		52 mm
Weights
Weight, approx.		85 g

Article number		6ES7138-4FC01-0AB0
		ET200S, EL-MOD.,4 F-DI/3 F-DO, DC 24V/2A
Power loss
Power loss, typ.		3.5 W
Digital inputs
Number of digital inputs		4
Input voltage
? Type of input voltage		DC
Input current
? for signal "1", typ.		3.5 mA
Standards, approvals, certificates
Highest safety class achievable in safety mode
? SIL acc. to IEC 61508		2
Dimensions
Width		30 mm
Height		81 mm
Depth		52 mm