Industrial Twisted Pair cable

• 2 x 2 cores
• Two cores with two dummy elements twisted into a pair.
• Each pair is enclosed by a plastic film and shielded with two aluminum-clad plastic films
• Outer woven shield around all pairs comprising tinned copper wires
• Plastic sheath (PVC)

The ITP Cable is available as a pre-assembled cable in the following versions:

• ITP cable 9/15
  with one 9-pin and one 15-pin connector;
  for direct connection of data terminals with an ITP interface to Industrial Ethernet network components with ITP interface
• ITP XP Standard Cable 9/9
  with two 9-pin connectors;
  crossed, for direct connection of two Industrial Ethernet network components with ITP interface
• ITP XP Standard Cable 15/15
  with two 15-pin connectors;
  crossed, for direct connection of two terminal devices with ITP interface

Possible applications of the preassembled ITP cables

Industrial Twisted Pair connector (9-pin)

• Sub-D connectors made of metal
• Straight cable outlet
• For connection of the 2 x 2-core installation cable to the OSM or ESM
• Easy mounting with screwdriver

Industrial Twisted Pair connector (15-pin)

• Sub-D connectors made of metal
• Variable cable outlet
• For connection of the 2 x 2-core installation cable connected to a terminal device
• Internal jumper for automatic switchover from AUI to twisted pair operation in SIMATIC NET CPs with integrated twisted pair transceiver
• Easy mounting with screwdriver