N 562/01 - Выключатель нагрузки N 562/01, 2х230V AC 6A, для установки на DIN-рейку, 2 ТЕ
N 562/01
Выключатель нагрузки N 562/01, 2х230V AC 6A, для установки на DIN-рейку, 2 ТЕ
One potential-free relay contact per output
Rated voltage 230 V AC
Rated current 10 A at p.f. = 1
Selectable programs for the independent switching on/off of electrical loads, either with direct operation or with forced control, with status objects
Operation as time switch or with on/off delay
Logic operation (AND/OR) of two communication objects for channel A
Selectable relay operating mode (NC contact / NO contact)
Control of an electro thermal valve actuator or electrical heating
Monitoring of the room temperature controller
Adjustable characteristics of thermal drive (valve opened or closed for isolated drive)
Communication objects for reception of up to three window contact data per channel and closing of the valve if the window is open
Communication object for the reception of a frost alarm signal per channel
Activation of the heating to 50 % of the On period (corresponds to a half-opened valve) if a frost alarm is received and on failure of communication with the room temperature controller
Configurable output state in case of bus voltage failure and bus voltage recovery
Bus-powered electronics
Integrated bus coupling unit, bus connection via contact system to data rail
Modular installation devices for mounting on TH35 EN 60715 mounting rail
