Service packs for INOX devices and INOX PRO devices

A service pack with replacement seal is offered for order as an accessory for each of the INOX devices.

Assembly kits for INOX PRO devices

The devices in enclosed stainless steel housing can be ordered and used as both supporting arm and stand variant. Corresponding packages with supporting arm and stand are offered for this.

Adapter sets

The adapter sets are required for connecting the SIMATIC HMI PRO device with the supporting arm head of the respective supporting arm system.

The adapter sets require the basic adapter. SIEMENS offers adapter sets for the VESA 75 and VESA 100 systems.

Since the supporting arm head is connected directly to the device, there is complete flexibility in the choice of supporting arm components.

Further adapter sets can be obtained directly from the respective supportinging arm manufacturer:

• Bernstein
• Rittal
• Rose
• Haseke and
• Rolec

Basic adapter

Adaptation to supporting arm/stand systems is possible using the basic adapter. It also enables connection to other PRO accessories, e.g. the Extension Units for 4:3 PRO devices. For the 4:3 and 16:9 variants, basic adapters are available according to design.

Extension Units (mechanical extensions at the side)

With the Extension Units, the range of on-site operating control options can be optimized. The units can be equipped individually, e.g. with illuminated pushbuttons, toggle switches, key-operated switches, emergency stop/emergency off, or an RFID reader.

• They can be mounted on the right and/or left side of the HMI PRO device (4:3).
• Individual configuration options with IP65 cable routing
• Available for all 4:3 15"/19" HMI PRO devices
• When devices are replaced, the wired extension units can remain on the base adapter and thus on the supporting arm

Back covers

The back covers in IP20 design are ideal for simple mounting of Panels, Panel PCs, Flat Panels and industrial Thin Clients on VESA 100 brackets.

Back covers are available for display sizes 15", 19" and 22" for the following SIMATIC HMI devices:

• Touch Panels
• Panel PC IPC477D¹⁾ and IPC277D
• Flat Panels
• Thin Clients

¹⁾ IPC477D 15" is only available as a single-touch version.

Stands/supporting arms

Note:

The complete range of SIMATIC HMI accessories and the latest technical specifications can be found in the Mall and in our online media, incl. photos.

Photos and product images may differ from the actual product.

https://eb.automation.siemens.com

Or on our SIMATIC Support pages:

http://support.automation.siemens.com