The Basic Line Module communicates with a CU320?2 or SIMOTION D4x5 2 Control Unit or Controller Extension CX32?2 via DRIVE?CLiQ.

Connection example for 20 kW and 40 kW Basic Line Modules in booksize format

Note: The thermostatic switch built into the braking resistor must be looped into the shutdown chain of the drive to prevent thermal overloading of the system in the event of a fault. If a braking resistor is not connected, a jumper must be connected between X21.1 and X21.2.

Connection example for 100 kW Basic Line Module in booksize format