1- и 2-фазные, =24 В . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на 1- и 2-фазные, =24 В

| | | |

1- и 2-фазные, =24 В

Order number	6AG1333-3BA10-7AA0	6AG1334-3BA10-7AA0
Product	SIPLUS PSU200M	SIPLUS PSU200M
Power supply, type	24 V/5 A	24 V/10 A
Input
Input	1-phase and 2-phase AC	1-phase and 2-phase AC
Supply voltage
? 1 with AC	120 ... 230 V	120 ... 230 V
? 2 with AC	230 ... 500 V	230 ... 500 V
? Note	Set by means of selector switch on the device; starting from Vin > 90/180 V	Set by means of selector switch on the device
Input voltage
? 1 with AC	85 ... 264 V	85 ... 264 V
? 2 with AC	176 ... 550 V	176 ... 550 V
Wide-range input	Yes	Yes
Overvoltage resistance	1300 Vpeak, 1.3 ms	1300 Vpeak, 1.3 ms
Mains buffering at Iout rated, min.	25 ms; at Vin = 120/230 V, typ. 150 ms at Vin = 400 V	25 ms; at Vin = 120/230 V, typ. 150 ms at Vin = 400 V
Rated line frequency	50 ... 60 Hz	50 ... 60 Hz
Rated line range	47 ... 63 Hz	47 ... 63 Hz
Input current
? at rated input voltage 120 V	2.2 A	4.4 A
? at rated input voltage 230 V	1.2 A	2.4 A
? at rated input voltage 500 V	0.61 A	1.1 A
Switch-on current limiting (+25 °C), max.	35 A	35 A
I?t, max.	1.7 A?·s	4 A?·s
Built-in incoming fuse	T 3.15 A (not accessible)	T 6.3 A (not accessible)
Protection in the mains power input (IEC 898)	Recommended miniature circuit breaker at 1-phase operation: from 6 A (10 A) characteristic C (B); required at 2-phase operation: circuit breaker 2-pole connected or circuit breaker 3RV2011-1EA10 (setting 3.8 A) or 3RV2711-1ED10 (UL 489) at 230 V; 3RV2011-1DA10 (setting 3 A) or 3RV2711-1DD10 (UL 489) at 400/500 V	Recommended miniature circuit breaker at 1-phase operation: from 6 A (10 A) characteristic C (B); required at 2-phase operation: circuit breaker 2-pole connected or circuit breaker 3RV2011-1EA10 (setting 3.8 A) or 3RV2711-1ED10 (UL 489) at 230 V; 3RV2011-1DA10 (setting 3 A) or 3RV2711-1DD10 (UL 489) at 400/500 V
Output
Output	Controlled, isolated DC voltage	Controlled, isolated DC voltage
Rated voltage Vout DC	24 V	24 V
Total tolerance, static ±	3 %	3 %
Static mains compensation, approx.	0.1 %	0.1 %
Static load balancing, approx.	0.1 %	0.1 %
Residual ripple peak-peak, max.	50 mV	50 mV
Spikes peak-peak, max. (bandwidth: 20 MHz)	200 mV	200 mV
Adjustment range	24 ... 28.8 V	24 ... 28.8 V
Product function Output voltage adjustable	Yes	Yes
Output voltage setting	via potentiometer	via potentiometer
Status display	Green LED for 24 V OK	Green LED for 24 V OK
Signaling	Relay contact (NO contact, rating 60 V DC/ 0.3 A) for "24 V OK"	Relay contact (NO contact, rating 60 V DC/ 0.3 A) for "24 V OK"
On/off behavior	Overshoot of Vout approx. 3 %	Overshoot of Vout approx. 3 %
Startup delay, max.	1 s	1 s
Voltage rise, typ.	50 ms	50 ms
Rated current value Iout rated	5 A	10 A
Current range	0 ... 5 A	0 ... 10 A
? Note		+60 ... +70 °C: Derating 2%/K (at 120 V, 230 V) or 3.5%/K (at 400 V)
Active power supplied typical	120 W	240 W
Short-term overload current
? at short-circuit during operation typical	15 A	30 A
Duration of overloading capability for excess current
? at short-circuit during operation	25 ms	25 ms
Constant overload current
? on short-circuiting during the start-up typical	6 A	12 A
Parallel switching for enhanced performance	Yes; switchable characteristic	Yes; switchable characteristic
Numbers of parallel switchable units for enhanced performance	2	2
Efficiency
Efficiency at Vout rated, Iout rated, approx.	88 %	91 %
Power loss at Vout rated, Iout rated, approx.	17 W	24 W
Active power loss during no-load operation maximum	4 W	6 W
Closed-loop control
Dynamic mains compensation (Vin rated ±15 %), max.	0.1 %	0.1 %
Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ.	3 %	3 %
Load step setting time 50 to 100%, typ.	2 ms	2 ms
Load step setting time 100 to 50%, typ.	2 ms	2 ms
Setting time maximum	5 ms	5 ms
Protection and monitoring
Output overvoltage protection	< 35 V	< 35 V
Current limitation, typ.	6 A	12 A
Property of the output Short-circuit proof	Yes	Yes
Short-circuit protection	Alternatively, constant current characteristic approx. 5.5 A or latching shutdown	Alternatively, constant current characteristic approx. 12 A or latching shutdown
Enduring short circuit current RMS value
? typical	6 A	12 A
Overload/short-circuit indicator	LED yellow for "overload", LED red for "latching shutdown"	LED yellow for "overload", LED red for "latching shutdown"
Safety
Primary/secondary isolation	Yes	Yes
Galvanic isolation	Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178	Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178
Protection class	Class I	Class I
Leakage current
? maximum	3.5 mA	3.5 mA
? typical	0.25 mA	0.32 mA
CE mark	Yes	Yes
UL/CSA approval	No	No
Explosion protection	in preparation: ATEX (EX) II 3G Ex nA nC IIC T3 Gc; cCSAus (CSA C22.2 No. 213, ANSI/ISA-12.12.01) Class I, Div. 2, Group ABCD, T3	in preparation: ATEX (EX) II 3G Ex nA nC IIC T3 Gc; cCSAus (CSA C22.2 No. 213, ANSI/ISA-12.12.01) Class I, Div. 2, Group ABCD, T3
Certificate of suitability IECEx	No	No
Certificate of suitability NEC Class 2	No	No
CB approval	Yes	Yes
Degree of protection (EN 60529)	IP20	IP20
EMC
Emitted interference	EN 55022 Class B	EN 55022 Class B
Supply harmonics limitation	EN 61000-3-2	EN 61000-3-2
Noise immunity	EN 61000-6-2	EN 61000-6-2
Operating data
Ambient temperature
? during operation	-25 ... +70 °C	-25 ... +70 °C
— Note	with natural convection	with natural convection
? during transport	-40 ... +85 °C	-40 ... +85 °C
? during storage	-40 ... +85 °C	-40 ... +85 °C
Ambient condition relating to ambient temperature - air pressure - installation altitude	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)
Relative humidity with condensation maximum	Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions)	Relative humidity, incl. condensation / frost permitted (no commissioning under condensation conditions)
Resistance to biologically active substances conformity acc. to EN 60721-3-3	Yes; Conformity with EN 60721-3-3, Class 3B2 mold, fungus and dry rot spores (with the excepion of fauna). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Conformity with EN 60721-3-3, Class 3B2 mold, fungus and dry rot spores (with the excepion of fauna). The supplied connector covers must remain on the unused interfaces during operation!
Resistance to chemically active substances conformity acc. to EN 60721-3-3	Yes; Conformity with EN 60721-3-3, Class 3C4 incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!	Yes; Conformity with EN 60721-3-3, Class 3C4 incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
Resistance to mechanically active substances conformity acc. to EN 60721-3-3	Yes; Conformity with EN 60721-3-3, Class 3S4 incl. Sand, dust. The supplied connector covers must remain on the unused interfaces during operation!	Yes; Conformity with EN 60721-3-3, Class 3S4 incl. Sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Mechanics
Connection technology	screw-type terminals	screw-type terminals
Connections
? Supply input	L, N, PE: 1 screw terminal each for 0.2 ... 2.5 mm? single-core/finely stranded	L, N, PE: 1 screw terminal each for 0.2 ... 2.5 mm? single-core/finely stranded
? Output	+, -: 2 screw terminals each for 0.2 ... 2.5 mm?	+, -: 2 screw terminals each for 0.2 ... 2.5 mm?
? Auxiliary	13, 14 (alarm signal): 1 screw terminal each for 0.14 ... 1.5 mm?	13, 14 (alarm signal): 1 screw terminal each for 0.14 ... 1.5 mm?
Width of the enclosure	70 mm	70 mm
Height of the enclosure	125 mm	125 mm
Depth of the enclosure	121 mm	121 mm
Weight, approx.	0.6 kg	0.8 kg
Product property of the enclosure housing for side-by-side mounting	Yes	Yes
Installation	Snaps onto DIN rail EN 60715 35x7.5/15	Snaps onto DIN rail EN 60715 35x7.5/15
Electrical accessories	Buffer module	Buffer module
Other information	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

Order number	6EP1333-3BA10	6EP1333-3BA10-8AC0	6EP1334-3BA10	6EP1334-3BA10-8AB0
Product	SITOP PSU200M	SITOP PSU200M	SITOP PSU200M	SITOP PSU200M
Power supply, type	24 V/5 A	24 V/5 A	24 V/10 A	24 V/10 A
Input
Input	1-phase and 2-phase AC	1-phase and 2-phase AC	1-phase and 2-phase AC	1-phase and 2-phase AC
Supply voltage
? 1 with AC	120 ... 230 V	120 ... 230 V	120 ... 230 V	120 ... 230 V
? 2 with AC	230 ... 500 V	230 ... 500 V	230 ... 500 V	230 ... 500 V
? Note	Set by means of selector switch on the device; starting from Vin > 90/180 V	Set by means of selector switch on the device; starting from Vin > 90/180 V	Set by means of selector switch on the device	Set by means of selector switch on the device
Input voltage
? 1 with AC	85 ... 264 V	85 ... 264 V	85 ... 264 V	85 ... 264 V
? 2 with AC	176 ... 550 V	176 ... 550 V	176 ... 550 V	176 ... 550 V
Wide-range input	Yes	Yes	Yes	Yes
Overvoltage resistance	1300 Vpeak, 1.3 ms	1300 Vpeak, 1.3 ms	1300 Vpeak, 1.3 ms	1300 Vpeak, 1.3 ms
Mains buffering at Iout rated, min.	25 ms; at Vin = 120/230 V, typ. 150 ms at Vin = 400 V	25 ms; at Vin = 120/230 V, typ. 150 ms at Vin = 400 V	25 ms; at Vin = 120/230 V, typ. 150 ms at Vin = 400 V	25 ms; at Vin = 120/230 V, typ. 150 ms at Vin = 400 V
Rated line frequency	50 ... 60 Hz	50 ... 60 Hz	50 ... 60 Hz	50 ... 60 Hz
Rated line range	47 ... 63 Hz	47 ... 63 Hz	47 ... 63 Hz	47 ... 63 Hz
Input current
? at rated input voltage 120 V	2.2 A	2.2 A	4.4 A	4.4 A
? at rated input voltage 230 V	1.2 A	1.2 A	2.4 A	2.4 A
? at rated input voltage 500 V	0.61 A	0.61 A	1.1 A	1.1 A
Switch-on current limiting (+25 °C), max.	35 A	35 A	35 A	35 A
I?t, max.	1.7 A?·s	1.7 A?·s	4 A?·s	4 A?·s
Built-in incoming fuse	T 3.15 A (not accessible)	T 3.15 A (not accessible)	T 6.3 A (not accessible)	T 6.3 A (not accessible)
Protection in the mains power input (IEC 898)	Recommended miniature circuit breaker at 1-phase operation: from 6 A (10 A) characteristic C (B); required at 2-phase operation: circuit breaker 2-pole connected or circuit breaker 3RV2011-1EA10 (setting 3.8 A) or 3RV2711-1ED10 (UL 489) at 230 V; 3RV2011-1DA10 (setting 3 A) or 3RV2711-1DD10 (UL 489) at 400/500 V	Recommended miniature circuit breaker at 1-phase operation: from 6 A (10 A) characteristic C (B); required at 2-phase operation: circuit breaker 2-pole connected or circuit breaker 3RV2011-1EA10 (setting 3.8 A) or 3RV2711-1ED10 (UL 489) at 230 V; 3RV2011-1DA10 (setting 3 A) or 3RV2711-1DD10 (UL 489) at 400/500 V	Recommended miniature circuit breaker at 1-phase operation: from 6 A (10 A) characteristic C (B); required at 2-phase operation: circuit breaker 2-pole connected or circuit breaker 3RV2011-1EA10 (setting 3.8 A) or 3RV2711-1ED10 (UL 489) at 230 V; 3RV2011-1DA10 (setting 3 A) or 3RV2711-1DD10 (UL 489) at 400/500 V	Recommended miniature circuit breaker at 1-phase operation: from 6 A (10 A) characteristic C (B); required at 2-phase operation: circuit breaker 2-pole connected or circuit breaker 3RV2011-1EA10 (setting 3.8 A) or 3RV2711-1ED10 (UL 489) at 230 V; 3RV2011-1DA10 (setting 3 A) or 3RV2711-1DD10 (UL 489) at 400/500 V
Output
Output	Controlled, isolated DC voltage	Controlled, isolated DC voltage	Controlled, isolated DC voltage	Controlled, isolated DC voltage
Rated voltage Vout DC	24 V	24 V	24 V	24 V
Total tolerance, static ±	3 %	3 %	3 %	3 %
Static mains compensation, approx.	0.1 %	0.1 %	0.1 %	0.1 %
Static load balancing, approx.	0.1 %	0.1 %	0.1 %	0.1 %
Residual ripple peak-peak, max.	50 mV	50 mV	50 mV	50 mV
Spikes peak-peak, max. (bandwidth: 20 MHz)	200 mV	200 mV	200 mV	200 mV
Adjustment range	24 ... 28.8 V	24 ... 28.8 V	24 ... 28.8 V	24 ... 28.8 V
Product function Output voltage adjustable	Yes	Yes	Yes	Yes
Output voltage setting	via potentiometer	via potentiometer	via potentiometer	via potentiometer
Status display	Green LED for 24 V OK	Green LED for 24 V OK	Green LED for 24 V OK	Green LED for 24 V OK
Signaling	Relay contact (NO contact, rating 60 V DC/ 0.3 A) for "24 V OK"	Relay contact (NO contact, rating 60 V DC/ 0.3 A) for "24 V OK"	Relay contact (NO contact, rating 60 V DC/ 0.3 A) for "24 V OK"	Relay contact (NO contact, rating 60 V DC/ 0.3 A) for "24 V OK"
On/off behavior	Overshoot of Vout approx. 3 %	Overshoot of Vout approx. 3 %	Overshoot of Vout approx. 3 %	Overshoot of Vout approx. 3 %
Startup delay, max.	1 s	1 s	1 s	1 s
Voltage rise, typ.	50 ms	50 ms	50 ms	50 ms
Rated current value Iout rated	5 A	5 A	10 A	10 A
Current range	0 ... 5 A	0 ... 5 A	0 ... 10 A	0 ... 10 A
? Note			+60 ... +70 °C: Derating 2%/K (at 120 V, 230 V) or 3.5%/K (at 400 V)	+60 ... +70 °C: Derating 2%/K (at 120 V, 230 V) or 3.5%/K (at 400 V)
Active power supplied typical	120 W	120 W	240 W	240 W
Short-term overload current
? at short-circuit during operation typical	15 A	15 A	30 A	30 A
Duration of overloading capability for excess current
? at short-circuit during operation	25 ms	25 ms	25 ms	25 ms
Constant overload current
? on short-circuiting during the start-up typical	6 A	6 A	12 A	12 A
Parallel switching for enhanced performance	Yes; switchable characteristic	Yes; switchable characteristic	Yes; switchable characteristic	Yes; switchable characteristic
Numbers of parallel switchable units for enhanced performance	2	2	2	2
Efficiency
Efficiency at Vout rated, Iout rated, approx.	88 %	88 %	91 %	91 %
Power loss at Vout rated, Iout rated, approx.	17 W	17 W	24 W	24 W
Active power loss during no-load operation maximum	4 W	4 W	6 W	6 W
Closed-loop control
Dynamic mains compensation (Vin rated ±15 %), max.	0.1 %	0.1 %	0.1 %	0.1 %
Dynamic load smoothing (Iout: 50/100/50 %), Uout ± typ.	3 %	3 %	3 %	3 %
Load step setting time 50 to 100%, typ.	2 ms	2 ms	2 ms	2 ms
Load step setting time 100 to 50%, typ.	2 ms	2 ms	2 ms	2 ms
Setting time maximum	5 ms	5 ms	5 ms	5 ms
Protection and monitoring
Output overvoltage protection	< 35 V	< 35 V	< 35 V	< 35 V
Current limitation, typ.	6 A	6 A	12 A	12 A
Property of the output Short-circuit proof	Yes	Yes	Yes	Yes
Short-circuit protection	Alternatively, constant current characteristic approx. 5.5 A or latching shutdown	Alternatively, constant current characteristic approx. 5.5 A or latching shutdown	Alternatively, constant current characteristic approx. 12 A or latching shutdown	Alternatively, constant current characteristic approx. 12 A or latching shutdown
Enduring short circuit current RMS value
? typical	6 A	6 A	12 A	12 A
Overload/short-circuit indicator	LED yellow for "overload", LED red for "latching shutdown"	LED yellow for "overload", LED red for "latching shutdown"	LED yellow for "overload", LED red for "latching shutdown"	LED yellow for "overload", LED red for "latching shutdown"
Safety
Primary/secondary isolation	Yes	Yes	Yes	Yes
Galvanic isolation	Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178	Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178	Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178	Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178
Protection class	Class I	Class I	Class I	Class I
Leakage current
? maximum	3.5 mA	3.5 mA	3.5 mA	3.5 mA
? typical	0.25 mA	0.25 mA	0.32 mA	0.32 mA
CE mark	Yes	Yes	Yes	Yes
UL/CSA approval	Yes	Yes	Yes	Yes
UL/cUL (CSA) approval	cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259	cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259	cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259	cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259
Explosion protection	ATEX (EX) II 3G Ex nA nC IIC T3 Gc; cCSAus (CSA C22.2 No. 213, ANSI/ISA-12.12.01) Class I, Div. 2, Group ABCD, T3	ATEX (EX) II 3G Ex nA nC IIC T3 Gc; cCSAus (CSA C22.2 No. 213, ANSI/ISA-12.12.01) Class I, Div. 2, Group ABCD, T3	ATEX (EX) II 3G Ex nA nC IIC T3 Gc; cCSAus (CSA C22.2 No. 213, ANSI/ISA-12.12.01) Class I, Div. 2, Group ABCD, T3	ATEX (EX) II 3G Ex nA nC IIC T3 Gc; cCSAus (CSA C22.2 No. 213, ANSI/ISA-12.12.01) Class I, Div. 2, Group ABCD, T3
Certificate of suitability IECEx	No	No	No	No
Certificate of suitability NEC Class 2	No	No	No	No
CB approval	Yes	Yes	Yes	Yes
Marine approval	GL, ABS	GL	GL, ABS	GL
Degree of protection (EN 60529)	IP20	IP20	IP20	IP20
EMC
Emitted interference	EN 55022 Class B	EN 55022 Class B	EN 55022 Class B	EN 55022 Class B
Supply harmonics limitation	EN 61000-3-2	EN 61000-3-2	EN 61000-3-2	EN 61000-3-2
Noise immunity	EN 61000-6-2	EN 61000-6-2	EN 61000-6-2	EN 61000-6-2
Operating data
Ambient temperature
? during operation	-25 ... +70 °C	-25 ... +70 °C	-25 ... +70 °C	-25 ... +70 °C
— Note	with natural convection	with natural convection	with natural convection	with natural convection
? during transport	-40 ... +85 °C	-40 ... +85 °C	-40 ... +85 °C	-40 ... +85 °C
? during storage	-40 ... +85 °C	-40 ... +85 °C	-40 ... +85 °C	-40 ... +85 °C
Humidity class according to EN 60721	Climate class 3K3, no condensation	Climate class 3K3, no condensation	Climate class 3K3, no condensation	Climate class 3K3, no condensation
Mechanics
Connection technology	screw-type terminals	screw-type terminals	screw-type terminals	screw-type terminals
Connections
? Supply input	L, N, PE: 1 screw terminal each for 0.2 ... 2.5 mm? single-core/finely stranded	L, N, PE: 1 screw terminal each for 0.2 ... 2.5 mm? single-core/finely stranded	L, N, PE: 1 screw terminal each for 0.2 ... 2.5 mm? single-core/finely stranded	L, N, PE: 1 screw terminal each for 0.2 ... 2.5 mm? single-core/finely stranded
? Output	+, -: 2 screw terminals each for 0.2 ... 2.5 mm?	+, -: 2 screw terminals each for 0.2 ... 2.5 mm?	+, -: 2 screw terminals each for 0.2 ... 2.5 mm?	+, -: 2 screw terminals each for 0.2 ... 2.5 mm?
? Auxiliary	13, 14 (alarm signal): 1 screw terminal each for 0.14 ... 1.5 mm?	13, 14 (alarm signal): 1 screw terminal each for 0.14 ... 1.5 mm?	13, 14 (alarm signal): 1 screw terminal each for 0.14 ... 1.5 mm?	13, 14 (alarm signal): 1 screw terminal each for 0.14 ... 1.5 mm?
Width of the enclosure	70 mm	70 mm	70 mm	70 mm
Height of the enclosure	125 mm	125 mm	125 mm	125 mm
Depth of the enclosure	121 mm	121 mm	121 mm	121 mm
Weight, approx.	0.6 kg	0.6 kg	0.8 kg	0.8 kg
Product property of the enclosure housing for side-by-side mounting	Yes	Yes	Yes	Yes
Installation	Snaps onto DIN rail EN 60715 35x7.5/15	Snaps onto DIN rail EN 60715 35x7.5/15	Snaps onto DIN rail EN 60715 35x7.5/15	Snaps onto DIN rail EN 60715 35x7.5/15
Electrical accessories	Buffer module	Buffer module	Buffer module	Buffer module
Other information	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)	Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)

skener.ru

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
Бесконтактные выключатели Конечные выключатели Оптические датчики Энкодеры

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FS - Установка умягчения

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 23

Deprecated: Function eregi() is deprecated in /home/h101150-2/siemens71.ru/docs/kip/kip.php on line 30
SKW-FK - Установка обезжелезивания