SIDOOR ATD430W machine tool door drive

The SIDOOR ATD430W machine tool door drive can be used to operate horizontal sliding doors. The drive system has been specially designed for use in a very wide range of machine tools. The communication-capable ATD430W controller offers complete flexibility for integration into a machine tool via PROFINET.

• For dynamic door weights up to 600 kg
• Integrate PROFINET interface (2 RJ45 ports)
• 5 freely parameterizable digital inputs for signal acquisition, of which one input can be optionally parameterizable for:
  • Connecting a light barrier as type 2 ESPE (electro-sensitive protective equipment) according to EN 61496-1
  • Connecting a pressure-sensitive edge according to ISO 13856-22, relay contacts for additional position signals
• 2 relay contacts for additional position signals
• Automatic determination of the door weight and friction during the learn run
• Parameter assignment and analysis of the door parameters via PROFIdrive
• Operating temperature -20 to +50 °C
• Flexible motor management, i.e. automatic recognition of the geared motor
• Assisted drive (motor-assisted door movement)
• Impulse stop (door stopped automatically by applying light force)
• Impulse drive (automatic door movement after applying light force)
• Opening width 0.3 to 5 m
• Auxiliary power output 24 V DC ±15 % and 0.4 A (short-circuit-proof)
• Output stage for the motor control is short-circuit proof
• Indicates the current operating states on a 7-segment display directly on the controller or using the Software Kit or Service Tool
• All door parameters can be assigned via the PROFIdrive profile with the function block provided. For details, see System Manual "SIDOOR AT40, ATD400V, ATD400K, ATD4xxW, ATD400S, ATE250S, ADT400T", http://support.automation.siemens.com/WW/view/en/58531074