Motor version

Cooling method

Motor type

Frame size

Operating mode

Air-cooled, enclosed version with self-ventilation

IC411

1LM1

315 ... 450

VSD

Air-cooled, enclosed version with forced-air cooling

IC416

1LQ1

315 ... 450

VSD

Water-cooled version with water-jacket cooling

IC71W

1LH1

315 ... 450

VSD, DOL

Water-cooled version with heat exchanger

IC86W

1LN1

315 ... 450

VSD

Air-cooled, open version with self-ventilation

IC01

1LL1

315 ... 450

VSD

Air-cooled, open version with forced-air cooling

IC06

1LP1

315 ... 450

VSD

Additional identification code
-Z with order code

Description

E88

Commissioning of the classification society by Siemens

E89

Commissioning of the classification society by third party

Inspection

Remarks

Material used

Certificate of the shaft according to EN 10204-3.1
Certificate for laminated core and copper according to EN 10204-2.1

Weld seams

Weld seams according to EN 287-1
Testing Welders – Welding – Part 1: steels,
German version EN 287-1:2004 + A2:2006

Housing drawings

Site supervision / inspection

Air gap measurements

No measurement, the theoretically determined value based on stator bore and rotor external diameter can be provided on request for an additional charge

Rotor design

Site supervision / inspection

Winding version

Site supervision / inspection

Winding insulation

Site supervision / inspection

Design, balancing

Site supervision / inspection

Motor dimensions, feet dimensions

Site supervision / inspection

Axial rotor play

No measurement, guaranteed value is stated in the documentation

First critical speed

No measurement, depending on the motor type the machines are subcritical or supercritical

Paints and varnishes

Certificate for layer thickness measurement

Additional identification code
-Z with order code

Description

F29

Noise measurement (in no-load operation), no noise analysis, with acceptance

F53

Measurement of locked-rotor torque and current, with acceptance

F59

Vibration analysis with acceptance test according to IEC 60034-14

F01

Routine test with customer acceptance test

or

F83

Type test with heat run for horizontal motors (IMB3), with acceptance

or

F93

Type test with heat run for vertical motors (IMV1), with acceptance