A range of accessories is available for SIDOOR elevator door drive systems with geared motors:

This is necessary to ensure low-noise operation of the door by the controller. The geared motors can be optimally integrated into the respective door drive system.

Rubber-metal anti-vibration mounts for geared motors

To ensure low-noise door operation, SIDOOR geared motors are integrated in the door system using rubber-metal anti-vibration mounts.

• Rubber-metal anti-vibration mount 6FB1104?0AT02?0AD0 for geared motors with a door weight of less than 300 kg
• Rubber-metal anti-vibration mount 6FB1104?0AT01?0AD0 for geared motors with a door weight of 300 kg or more

Rubber-metal anti-vibration mount 6FB1104?0AT02?0AD0

Rubber-metal anti-vibration mount 6FB1104?0AT01?0AD0

Mounting brackets

Two different mounting brackets are available with elongated holes:

• Mounting bracket 6FB1104?0AT01?0AS0 for the geared motors for flexible accommodation of the rubber-bonded metal
• Mounting bracket 6FB1104?0AT02?0AS0 for the deflector unit, this enables the toothed belt to be set to the required belt tension.

Mounting bracket 6FB1104?0AT01?0AS0 for mounting the geared motor

Mounting bracket 6FB1104?0AT02?0AS0 for the deflector unit

Door clutch holder

The door clutch holder serves to connect the respective door leaf by means of a toothed belt while also functioning as a toothed-belt lock. One door clutch holder per door leaf is required. The toothed-belt lock can accommodate both open ends of the toothed belt.

A door clutch holder is available for each toothed belt width:

• Width 12 mm: 6FB1104?0AT01?0CP0
• Width 14 mm: 6FB1104?0AT02?0CP0

Door clutch holder 6FB1104?0AT01?0CP0 (packaging size = 1 unit)

Deflector unit

The deflector unit 6FB1104?0AT03?0AS0 contains an embedded belt pulley which can be mounted on the door system.

The toothed belt STS is redirected via this deflector unit.

Deflector unit 6FB1104?0AT03?0AS0

Toothed belt STS

The door system is moved between the end positions of the door using the STS toothed belts. Two different toothed belt lengths can be ordered for each toothed belt width.

Toothed belt width 12 mm:

• Length 4 m: 6FB1104?0AT01?0AB0
• Length 45 m: 6FB1104?0AT02?0AB0

Toothed belt width 14 mm:

• Length 4 m: 6FB1104?0AT03?0AB0
• Length 55 m: 6FB1104?0AT04?0AB0

Toothed belt 6FB1104?0AT01?0AB0, length 4 m

Toothed belt 6FB1104?0AT02?0AB0, length 45 m

A range of accessories is available for SIDOOR elevator door systems with EC technology:

Motor holder 6FB1104-0AT03-0AD0 for accommodation of the SIDOOR MED280 direct drive.

SIDOOR motor holder

Mounting bracket:

• For mounting the SIDOOR motor holder 6FB1104-0AT01-0AS0

Mounting bracket for geared motor

• With tensioning device for mounting the deflector unit and setting the toothed belt to the required tension (large) 6FB1104-0AT05-0AS4

SIDOOR mounting bracket, large

• With tensioning device for mounting the deflector unit and setting the toothed belt to the required tension (small) 6FB1104-0AT05-0AS5

SIDOOR mounting bracket, small

Door clutch holder

• For attaching both ends of the toothed belt and connecting the respective door panel to the toothed belt,
  width 20 mm 6FB1104-0AT05-0AS1

SIDOOR door clutch holder

Deflector unit:

For attaching the SIDOOR toothed belt and fixing to the door 6FB1104-0AT07-0AS0

SIDOOR deflector unit

Toothed belt STD
As a connection between the door system and the end positions of the door

Toothed belt width 20 mm. Length 4 m 6FB1104-0AT05-0AB0

SIDOOR toothed belt, small

Toothed belt width 20 mm. Length 45 m 6FB1104-0AT06-0AB1

SIDOOR toothed belt, large