The 1FW6 motors which must be fed from the SINAMICS S120 drive system are designed for operation on a 600 V DC-link voltage level and require a sinusoidal current. The cable connection is brought out of the front face of the stator and the free cable end must be connected to a terminal box provided by the machine manufacturer. The length of the power and signal cables from the motor to the drive system must not exceed 50 m (164 ft). Absolute measuring systems with DRIVE-CLiQ Measuring systems with integrated DRIVE-CLiQ interface are available from different manufacuters. The encoders can be used as motor feedback system. The current overview of manufacturers and available measuring systems can be found at : http://support.automation.siemens.com/WW/view/en/65402168 In addition, absolute measuring systems with EnDat 2.1 and incremental measuring systems with 1 Vpp can be used. |
| Каталог 2018 | Каталог 2017 | Каталог 2016 | Каталог 2015 | Каталог 2014 | Каталог 2013 | Каталог 2012 | Сертификат | Контакты | Карта сайта | Поиск |
