The basic versions of the SINUMERIK Machine Push Button Panels MPP 483 IE/MPP 483 IEH provide:

• Emergency stop button (4-wire), latching, tamper-proof
• 8 equipped illuminated pushbuttons for control elements (d = 22.5 mm/0.89 in)
• 2 blanking plugs for easy retrofitting
• 25 function keys with inscribed standard slide-in labels (membrane keys)
• Key switches with 2 positions for bridging the emergency stop circuit and for authorization of mode selection
• Direct key connection for SINUMERIK OP 012/OP 015A/OP 019, incl. ribbon cable
• Feed rate override
• Interfaces for 2 handwheels when connected via Industrial Ethernet (function depends on CNC software)
• Communication via Industrial Ethernet
• 1 port for SINUMERIK HT 2/HT 8 handheld terminals (only with SINUMERIK MPP 483 IEH)

Expansion options:

• 2 spare slots (d = 22.5 mm/0.89 in)
• Spindle override
• Individual adaptation of colors and labels on membrane and long-stroke keys. As a general rule, all keys can be freely assigned and inscribed.

Special versions:

• SINUMERIK MPP 483 IE-S../MPP 483 IEH-S..:
  These special versions with virtually unlimited configuration options combining various control elements and options are available, for example, with the EKS identification system (Euchner Key System).
• SINUMERIK MPP 483 IE-L/MPP 483 IEH-L:
  This special Large version is characterized by a higher masking frame (244 mm/9.61 in) that offers additional mounting space as an integrated expansion panel.