Customized solutions

In addition to the wide range of possibilities of configuring drives with the available modules and options to address specific plant and system requirements, for special applications we also offer customized applications to fully comply with the actual requirement.

These are based on the standard SINAMICS S120 Cabinet Modules and are supplied as completely wired units that are ready to be connected up.

Examples of applications such as these include:

• SINAMICS S120 Liquid-Cooled Cabinet Applications
  To comply with high requirements regarding installation and ambient conditions, SINAMICS S120 Cabinet Modules can also be supplied in a liquid-cooled conversion.
  The power loss of the units is transferred to the cooling liquid and dissipated, without noticeably increasing the temperature of the direct environment. As a consequence it is not necessary to control the climate of the electrical room, a costly process.
  The application involves using liquid-cooled Line and Motor Modules in the chassis format, installed in Cabinet Modules and a cooling unit that is appropriately adapted for the application.
• SINAMICS S120 Switch-Over Modules
  The SINAMICS S120 Switch-Over Module is used to operate various motors at different times at a common converter.
  A Switch-Over Module switches the output of the Motor Module to the motor that is currently required.
  If, for example processes powered by specific motors run at different times, or if the individual motor is only briefly used during the day, then costs and space can be saved by using just one converter, supplemented with the corresponding Switch-Over Module.
  Such an application involves, for instance, pump drives on tankers when various ship's compartments have to be emptied one after the other. Another application involves container cranes, if in addition to the drive for loading and unloading, also the drive for operating the boom must be fed from the converter.
• SINAMICS S120 Motor Multi-Connection Modules
  SINAMICS S120 Motor Multi-Connection Modules are intended for applications in conjunction with group drives where a different number of multi-motor outputs are required.
  These involve supplementing Motor Modules by a corresponding control and switching and protection devices. This configuration allows the associated motors with small power ratings (motor groups) to be operated from a common inverter with a high power rating.
  The completely prewired cabinet units that are ready to be connected up simplify and shorten commissioning. The transparent and flexible design allows changes and additions to be made at any time, without involving high associated costs.

Simply contact us if you are interested or require these or any other applications.

Notes regarding the addresses of contact persons are provided in the appendix under "Contact partners for Industry Automation and Drive Technologies".

Cement mill

Ship in a port with container crane

Oil rig