Wireless frequencies | |
Operating frequency Rated value | 13.56 MHz |
Electrical data | |
Range maximum | 500 mm; range is reader dependent: observe http://support.automation.siemens.com/WW/view/en/67384964 |
Protocol with radio transmission | ISO 15693 |
Transfer rate with radio transmission maximum | 26.5 kbit/s |
Product property multitag-capable | Yes |
Product component Backup battery | No |
Memory | |
Type of memory | EEPROM |
Storage capacity of the user memory | 992 byte |
Type of memory organization | UID (fixed code) 8 bytes, user memory 992 bytes, configuration memory 24 bytes |
Number of read cycles at ambient temperature < 40 °C maximum | 100 000 000 000 000 |
Number of write cycles at ambient temperature < 40 °C maximum | 1 000 000 |
Data retention time at ambient temperature < 40 °C not less than | 10 y |
Property of memory | Block-by-block write protection of the user memory |
Type of transponder chip used | Infineon My-D SRF 55V10P |
Mechanical data | |
Material | PPS |
Color | black |
Tightening torque of the screw for securing the equipment maximum | 1.5 N·m |
Mounting distance relating to metal surfaces recommended minimum | 30 mm |
Permitted ambient conditions | |
Ambient temperature | |
| -25 ... +100 °C |
| -40 ... +220 °C |
| -40 ... +100 °C |
Ambient condition for operation | Operating temperature permanent up to 100 °C, at 220 °C: up to 2000 hours or 1500 temperature cycles, at 200 °C: up to 5000 hours or 3000 temperature cycles |
Protection class IP | IP68 / IPx9K |
Shock resistance | According to DIN EN 60721-3-7 Class 7 M3 |
Shock acceleration | 500 m/s? |
Resistance against vibration | 200 m/s? |
Design, dimensions and weight | |
Height | 15 mm |
Diameter | 85 mm |
Net weight | 50 g |
Mounting type | M5 screw |
Product properties, functions, components general | |
Product property | |
| Yes |
| No |
Standards, specifications, approvals | |
Certificate of suitability | Ex: II 3 G Ex nA II T2, II 3 D Ex tD A22 IP68 T 210°C |
MTBF | 228 y |
Accessories | |
accessories | Spacer, quick-change holder |
