|
| | | |
powerconfig- Parameterization, documentation, operation and monitoring in one software package
- Documentation of measured values and settings
- Clear presentation of the available parameters including plausibility testing of the inputs
- Display of the available device statuses and measured values in standardized views
- Parameter assignment of all electronic 3VA2 components, e.g.:
- ETUs of the 5 and 8 series
- COM800/COM100 breaker data servers
- EFB300 (External Function Box).
- Support of the test functions for 3VA2, by means of the TD500 test device for all ETUs.
- Full support of the 3WL air circuit breakers, i.e. including the display and triggering of the curves and all other functions.
- Project-oriented storage of device data
- Easy operation and usability
- Support of the various communication interfaces (Modbus RTU, Modbus TCP, PROFIBUS, PROFINET)
- Communication with the 3VA2 circuit breaker via the TD500 at the USB port, as an additional option to Modbus TCP, PROFIBUS and PROFINET.
- Supported languages: English and German
- Read-out and saving of message lists, load profiles, and histories (device-dependent)
- Overview of the circuit breaker statuses with currents and events. Individually configurable system documentation.
- Update of the device firmware and loading of language packs (device-dependent)
- No programming knowledge required for operation
- powerconfig can be started on the PC as follows, enabling communication via PROFIBUS and PROFINET:
- direct from Windows
- from STEP 7‚ V5.5 SP1
- from TIA Portal with STEP 7 V12 or V13
|
|
