Конфигурация

Determining the QT... or QM... package number using the following package overview

• Technology selection: turning QT... or milling QM...
• Selection of the drive configuration using the electrical characteristics of the feed and spindle motors on the basis of the package overview
• Based on the characteristics of the SIMOTICS S-1FK7 feed motors, the corresponding row is selected in the package overview:
  With or without holding brake
• Based on the characteristics of the SIMOTICS M-1PH8 spindle motor, the corresponding row is selected in the package overview:
  Type of construction IM B3 or IM B5
• The package number required to order the package can be found at the intersection between the row and column. The appropriate SINAMICS S120 Combi drive system is determined with the help of the color code of the package number.

Selection of the CNC and additional components from this catalog

• Selection of the CNC variant:
  • PPU 24x.3, PPU 26x.3 or PPU 28x.3
  • Horizontal or vertical
• Addition of system software Turning or Milling on CompactFlash card. The packjage is delivered with the CompactFlash card preinstalled in the SINUMERIK 828.
• Selection of possible CNC options
• Addition of the MOTION-CONNECT connection system
• Addition of other accessories

For easier selection of the CNC and additional components, use of the SIZER for Siemens Drives engineering tool is recommended.

Example for ordering a Quick Package QM...
for milling machines:

Motor versions for Quick Packages

SIMOTICS S-1FK7 feed motors

• Compact or High Inertia
• Absolute encoder 20 bit + 12 bit multi-turn (AM20DQI encoder)
• DE shaft extension: Plain shaft
• Shaft and flange accuracy: Tolerance N
• Holding brake: With or without
• Degree of protection IP65
• Paint finish: Anthracite RAL 7016

SIMOTICS M-1PH8 spindle motors for turning machines

• 22 bit incremental encoder + commutation position 11 bit (IC22DQ encoder)
• Cooling: Forced ventilation from DE to NDE
• Type of construction: IM B3 or IM B5
• DE shaft extension: Plain shaft
• Bearing version: Standard
• Vibration severity: Grade S/A
• Shaft and flange accuracy: Tolerance R
• Cable connection: Terminal box top/cable entry from right/signal connection DE

SIMOTICS M-1PH8 spindle motors for milling machines

• SIMOTICS M-1PH808: 20 bit incremental encoder without commutation position (IN20DQ encoder)
• SIMOTICS M-1PH810/1PH813: 22 bit incremental encoder + commutation position 11 bit (IC22DQ encoder)
• Cooling: Forced ventilation from DE to NDE
• Type of construction: IM B3 or IM B5
• DE shaft extension: Plain shaft
• Bearing version: Performance
• Vibration severity: Grade SPECIAL/B
• Shaft and flange accuracy: Tolerance SPECIAL
• Cable connection: Terminal box top/cable entry from right/signal connection DE