IFN VIB-ACC | |
Communication (LNK0 … LNK2) | |
Quantity | 3 |
Connector | Female connector 8-pin (M12) |
Protocol | IEEE1394a / b |
Data rate | 400 Mbit/s |
Galvanic isolation | no |
Power supply (PWR) | |
Connector | Male connector 5-pin (M12) |
DC input voltage | 19.2 … 32 V |
DC overvoltage protection | Max. 35 V |
DC current consumption | Typ. 0.2 A at 24 V DC |
Reverse-polarity protection | yes |
Power supply | Stabilized |
DC power consumption | Typ. 4.8 W |
Electrical isolation | no |
Measuring inputs (CH1 … CH6) | |
Quantity | 6 |
Connector | Female connector 5-pin (M12) |
Resolution | 16 bits (15 + sign) |
DC overvoltage protection | ±60 V |
Postscanning (parameterizable in SIPLUS CMS X?Tools) | 0.014 / 0.33 / 4 / 8 / 16 / 24 / 48 / 64 / 96 kHz |
IEPE sensor input (CH1 … CH6) | |
Crosstalk attenuation (CTA) | -70 dB at 1 kHz |
Signal-to-noise ratio (SNR) | -70 dB |
Scanning frequency | 192 kHz |
Input frequency range | 0.0001 … 40 kHz |
Accuracy | ±0,7 % |
Galvanic isolation | no |
Cable break monitoring | yes |
Cable short-circuit monitoring | yes |
Analog input (CH6) | |
DC input voltage | ±30 V |
DC input frequency range | 0 … 1 kHz |
Crosstalk attenuation (CTA) | -78 dB at 1 kHz |
Signal-to-noise ratio (SNR) | -69 dB |
Scanning frequency | 192 kHz |
Accuracy | ±1 % |
Cable break monitoring | no |
Cable short-circuit monitoring | no |
Functional grounding | |
Connection | M4 screw with contact washer |
Cable cross-section | 2.5 mm2 |
Connecting cable | |
Communications | Pre-assembled 8-pin cable (shielded)1) |
Signal inputs | Pre-assembled 5-pin cable (shielded)1) |
Power supply | Pre-assembled 5-pin cable (shielded)1) |
Environmental conditions | |
Operating temperature | -40 ... +65 °C |
Storage/transport temperature | -40 ... +85 °C |
Degree of protection | IP67 |
Constructional design | |
Enclosure | Aluminum |
Dimensions (H x W x D) incl. connector | |
- without DIN rail and mounting bracket
| 210 mm x 86 mm x 87 mm |
| 210 mm x 86 mm x 96 mm |
| 243 mm x 86 mm x 97 mm |
Installation | |
| DIN rail TH 35-15 according to IEC 60715 |
| Mounting bracket1) |
Minimum clearances | |
| 80 mm |
| 25 mm |
| 25 mm |
Weight | Approx. 1240 g |
Approvals | |
CE | Industrial environment |
