CP 5512 . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на CP 5512

| | | | | | |

CP 5512

Order number		6GK1551-2AA00
Product type designation		CP 5512
Transmission rate
Transfer rate
? at the 1st interface acc. to PROFIBUS		9.6 kbit/s ... 12 Mbit/s
Interfaces
Number of electrical connections
? at the 1st interface acc. to PROFIBUS		1
Type of electrical connection
? at the 1st interface acc. to PROFIBUS		9-pin Sub-D socket (RS 485)
Supply voltage, current consumption, power loss
Type of voltage of the supply voltage		DC
Supply voltage
? 1 from backplane bus		3.3 V
Relative symmetrical tolerance for DC
? at 3.3 V		5 %
Consumed current
? 1 from backplane bus for DC maximum		0.52 A
Active power loss		1.8 W
Permitted ambient conditions
Ambient temperature
? during operation		5 ... 45 °C
? during storage		-20 ... +60 °C
? during transport		-20 ... +60 °C
Relative humidity at 25 °C without condensation during operation maximum		95 %
Protection class IP		IP00
Design, dimensions and weight
Module format		PC card Type II CardBus (32 bit)
Width		86 mm
Height		5 mm
Depth		54 mm
Net weight		130 g
Number of plug-in cards of same design plug-in per PC station		1
Number of units Note		-
Performance data
Performance data open communication
Software for open communication by means of SEND/RECEIVE required		Yes, SOFTNET-PB DP / SOFTNET-PB DP Slave / SOFTNET-PB S7
Number of possible connections for open communication by means of SEND/RECEIVE maximum		50
Performance data PROFIBUS DP
Software for DP master function required		Yes, SOFTNET-PB DP
Service as DP master
? DPV0		Yes
? DPV1		No
? DPV2		No
Number of DP slaves on DP master usable		64
Amount of data
? of the address area of the inputs as DP master total		7 808 byte
? of the address area of the outputs as DP master total		7 808 byte
? of the address area of the inputs per DP slave		244 byte
? of the address area of the outputs per DP slave		244 byte
? of the address area of the diagnostic data per DP slave		244 byte
Software for DP slave function required		Yes, SOFTNET-PB DP slave
Service as DP slave
? DPV0		Yes
? DPV1		No
Amount of data
? of the address area of the inputs as DP slave total		122 byte
? of the address area of the outputs as DP slave total		122 byte
Performance data S7 communication
Software for S7 communication required		Yes, SOFTNET-PB S7
Number of possible connections for S7/PG communication maximum		8
Performance data multi-protocol mode
Number of configurable connections per PC station		207
Product functions management, configuration
Configuration software required		Included in the scope of delivery of the required software product
Product functions Diagnosis
Product function
? Port diagnostics		Yes
Standards, specifications, approvals
Standard
? for EMC		2004/108/EC
? for safety from CSA and UL		CAN/CSA C22.2 & UL 60950-1
? for emitted interference		EN 61000-6-3, EN 61000-6-4
? for interference immunity		EN 61000-6-1, EN 61000-6-2
Certificate of suitability
? CE marking		Yes
? C-Tick		Yes