SIMATIC NET, FC СТАНДАРТНЫЙ IE TP КАБЕЛЬ ДЛЯ БЫСТРОГО МОНТАЖА (FC), ДЛЯ ПОДКЛ. К FC СОЕДИНИТЕЛЮ RJ45, 4-ЖИЛЬНЫЙ, ЭКРАНИРОВАННЫЙ, КАТЕГОРИЯ 5, ПОСТАВКА ПО МЕТРАЖУ ОТРЕЗКАМИ ДЛИНОЙ 20 ... 1000 M
1.72 ?
CBE20 Communication Board
The CBE20 Communication Board is required, if
a SINAMICS S120 or SINAMIC S150 converter, equipped with a CU320-2 DP (PROFIBUS) Control Unit, is to be connected to a PROFINET-IO network
SINAMICS Link is to be used to directly exchange data between several CU320-2 DP (PROFIBUS) or CU320-2 PN (PROFINET) Control Units without using a higher-level control system.
With the CBE20 Communication Board, SINAMICS S120 or SINAMICS S150 is a PROFINET IO device in the sense of PROFINET and can perform the following functions:
Connects to controls as PROFINET IO devices according to the PROFIdrive profile
Standard TCP/IP communication for engineering processes using the STARTER commissioning tool
Integrated 4-port switch with four RJ45 sockets based on the PROFINET ASIC ERTEC400. The optimum topology (line, star, tree) can therefore be configured without additional external switches.
SINAMICS Link
SINAMICS Link can be used to directly exchange data between several CU320-2 DP (PROFIBUS) or CU320-2 PN (PROFINET) Control Units without using a higher-level control system. In this case, the CBE20 Communication Board is required. Possible applications for the SINAMICS Link include:
Torque distribution for several drives
Setpoint cascading for several drives
Load distribution for drives coupled through a material web
Couplings between SINAMICS G or SINAMICS S with the CU320-2 Control Unit and SINAMICS DC Master with CUD Control Units.
Participants other than the CU320-2 Control Units or the CUD Control Units of the SINAMICS DC Master cannot be integrated into this communication network.
SINAMICS Link is activated by appropriately parameterizing the Control Units of the participants.
