6XV1830-3DN15

Цена на сайте указана розничная в ЕВРО без учета НДС.
Для уточнения цены и размера предоставляемой скидки - звоните или присылайте заявки

Intelligent Operator Panel IOP Handheld

IOP Handheld for mobile use

The Intelligent Operator Panel IOP Handheld is a very user-friendly and powerful operator panel for commissioning and diagnostics as well as local operator control and monitoring of SINAMICS G110D, SINAMICS G120D and SINAMICS G110M distributed inverters.

The IOP supports both entry-level personnel and drive experts. Thanks to the large plain text display, the menu-based operation and the application wizards, it is easy to commission standard drives. A drive can be essentially commissioned without having to use a printed parameter list – as the parameters are displayed in plain text, and explanatory help texts and a parameter filtering function are provided.

Application wizards interactively guide you when commissioning important applications such as conveyor technology, pumps, fans and compressors.

There is a basic commissioning wizard for general commissioning.

The drives are easily controlled manually using directly assigned buttons and the navigation wheel. The IOP Handheld has a dedicated switchover button to switch over from automatic to manual mode.

The inverter can be diagnosed in a user-friendly fashion using the plain text display of faults and alarms. Help texts can be obtained by pressing the INFO button.

Up to 2 process values can be displayed graphically or numerically on the status screen/status display.

Process values can also be displayed in technological units.

The IOP Handheld supports standard commissioning of identical drives. For this purpose, a parameter list can be copied from an inverter into the IOP Handheld and when required, downloaded into other drive units of the same type.

The IOP supports the following languages ¹⁾: German, English, French, Italian, Spanish, Portuguese, Dutch, Swedish, Russian, Czech, Polish, Turkish, Finnish.

In addition to the IOP, the IOP Handheld includes a housing with rechargeable batteries, charging unit and RS232 connecting cable. The charging unit is supplied with connector adapters for Europe, the US and UK. When the batteries are fully charged, the operating time is up to 8 hours.

To connect the IOP handheld to SINAMICS G110D, SINAMICS G120D and SINAMICS G110M, the RS232 connecting cable with optical interface is required in addition.

Updating the IOP Handheld

The IOP Handheld can be updated and expanded using the integrated USB interface.

Data to support future drive systems can be transferred from the PC to the IOP Handheld via drag & drop. Further, the USB interface allows user languages and wizards that will become available in the future to be subsequently downloaded and the firmware to be updated for the IOP Handheld ¹⁾.

¹⁾ For additional information, see
http://support.automation.siemens.com/WW/view/en/67273266

Selection and ordering data

Memory card

SINAMICS memory card (SD card)

The parameter settings for an inverter can be stored on the SINAMICS SD memory card. When service is required, e.g. after the inverter has been replaced and the data have been downloaded from the memory card the drive system is immediately ready for use again.

• Parameter settings can be written from the memory card to the inverter or saved from the inverter to the memory card.
• Up to 100 parameter sets can be stored.
• The memory card supports standard commissioning without the use of the Intelligent Operator Panel IOP Handheld or the STARTER and SINAMICS Startdrive commissioning tools.

Note:

The memory card is not required for operation and does not have to remain inserted.

Selection and ordering data

For further information about firmware V4.7:

http://support.automation.siemens.com/WW/view/en/92554110

PC inverter connection kit 2 (mini USB interface cable for communication with a PC)

For controlling and commissioning an inverter directly from a PC via a point-to-point connection if the appropriate software (STARTER commissioning tool¹⁾, V4.3 SP3 and higher or SINAMICS Startdrive V13 and higher) has been installed.

Selection and ordering data

Wall mounting kit

SINAMICS G110M wall mounting kit

A wall mounting kit is available if SINAMICS G110M should not be mounted on a (geared) motor. With the wall mounting kit the SINAMCS G110M frequency inverter can be mounted close to the motor in the application and can thus be used flexibly, adapted to the conditions of the application.

The wall mounting kit contains a metal cable gland for connecting the motor cable (max. 5 m/16.41 shielded) ft and a fan including connecting cable for cooling the Power Module.

Note:

Only one of the CU240M Control Units for motor frame size 71 can be fitted onto a wall mounting kit.

Compatible CU240M Control Units

Selection and ordering data

Dimensional drawings

SINAMICS G110M Wall mounting kit

Installation kits

Different installation kits can be ordered as accessories for the Control Units with plug-in connections and Control Units with cable gland connections.

These kits include covers or cable glands for protecting or connecting the 400 V 3 AC supply, the 24 V DC supply and the mechanical motor brake.

Selection and ordering data

STARTER commissioning tool

The STARTER commissioning tool (V4.3 SP3 and higher) supports the commissioning and maintenance of SINAMICS G110M inverters. The operator guidance combined with comprehensive, user-friendly functions for the relevant drive solution allow you to commission the device quickly and easily.

Selection and ordering data

¹⁾ The STARTER commissioning tool is also available on the Internet at http://support.automation.siemens.com/WW/view/en/10804985/133100

SINAMICS Startdrive commissioning tool

The SINAMICS Startdrive commissioning tool (V13 and higher) supports the commissioning and maintenance of SINAMICS G110M inverters. SINAMICS Startdrive is part of the TIA Portal engineering platform. It supports the intuitive integration of SINAMICS drives in automation. The same operator control concept, the elimination of interfaces and a high degree of user-friendliness make it possible to quickly integrate SINAMICS into an automation process and start it up with the TIA Portal. The TIA Portal with SINAMICS Startdrive offers you a totally integrated engineering platform for the complete application from the project engineering phase through to commissioning and diagnostics.

Selection and ordering data

¹⁾ The SINAMICS Startdrive commissioning tool is also available on the Internet at http://support.automation.siemens.com/WW/view/en/68034568

An overview of all available accessories (e.g. connectors and cables) can be found under the following link:
http://www.siemens.com/distributeddrives-supplementaryproducts

Connecting cables for the Control Unit

PROFINET connecting cable

Flexible plug-in cables and plug-in connectors that can be assembled in the field for transmission of data (up to 100 Mbit/s) between Industrial Ethernet stations with IP65 degree of protection.

Selection and ordering data

PROFIBUS connecting cable

Flexible plug-in cables/connectors for transmission of data (up to 12 Mbit/s) from PROFIBUS stations.

Selection and ordering data

Connecting cables/plug-in connectors for supplying the Control Unit with power

Selection and ordering data

Connecting cables and connectors for digital inputs and outputs

Selection and ordering data

Connecting cables and connectors for analog inputs

Selection and ordering data

Connecting cables for Power Modules

Connecting cables pre-assembled at one end and connector sets to connect to the line supply

Selection and ordering data

Connector insert for power loop-through

Selection and ordering data

Power bus distribution 400 V in IP65 degree of protection

Selection and ordering data

Not essential (daisy chaining within device); use is optional.