SINAMICS 24-В-КЛЕММНЫЙ АДАПТЕР ДЛЯ МОДУЛЕЙ КНИЖНОГО ФОРМАТА
13.27 ?
Double Motor Modules in booksize format
Double Motor Modules feature the following connections and interfaces as standard:
2 DC link connections via integrated DC link busbars
2 electronics power supply connections via integrated 24 V DC busbars
4 DRIVE?CLiQ sockets
2 plug-in motor connections (not included in scope of supply)
2 safe standstill inputs (1 input per axis)
2 safe motor brake controls
2 temperature sensor inputs (KTY84-130 or PTC)
3 PE (protective earth) connections
The status of the Motor Modules is indicated via two multi-color LEDs.
On Double Motor Modules, the motor cable shield can be connected in the connector.
The signal cable shield can be connected to the Motor Module by means of a shield connection terminal, e.g. Weidmuller type KLBU 3?8 SC.
The scope of supply of the Motor Modules includes:
DRIVE?CLiQ cable appropriate to the width of the Motor Module for connection to the adjacent Motor Module, length = width of Motor Module + 0.06 m (0.20 ft)
2 blanking plugs for sealing unused DRIVE-CLiQ sockets
Jumper for connecting the 24 V DC busbar to the adjacent Motor Module
Connectors X21 and X22
Device fans for cooling power units on modules with internal and external air cooling supplied from the internal voltage levels
